✦ LIBER ✦

High-strength Al-Zn-Mg-Cu alloys

✍ Scribed by I. N. Fridlyander; R. A. Krivenko; A. N. Chekanov

Publisher: Springer US
Year: 1980
Tongue: English
Weight: 554 KB
Volume: 22
Category: Article
ISSN: 0026-0673
DOI: 10.1007/bf00700572

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Local electrochemical properties of lase

Local electrochemical properties of laser beam-welded high-strength Al–Zn–Mg–Cu alloys

✍ J. Wloka; T. Hack; S. Virtanen 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 German ⚖ 628 KB

## Abstract Butt welds of two high‐strength Al–Zn–Mg–Cu alloys with different zinc contents were welded by a laser beam welding technique. Due to the high energy density of the laser beam, the microstructural changes are confined to very thin regions. Electrochemical properties of the weld heat‐aff

Static creep behaviour of Al-Zn-Mg and A

Static creep behaviour of Al-Zn-Mg and Al-Zn-Mg-Cu alloys

✍ Jong Geon Park; Deuk Yong Lee; Jaeha Choi 📂 Article 📅 1996 🏛 Springer 🌐 English ⚖ 933 KB

Processing of ultra-high strength SiCp/A

Processing of ultra-high strength SiCp/Al–Zn–Mg–Cu composites

✍ Wuhua Yuan; Jian Zhang; Chenchen Zhang; Zhenhua Chen 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 628 KB

The ultra-high strength SiC p /Al-10%Zn-3.6%Mg-1.8%Cu-0.36%Zr-0.15%Ni composite was prepared by spray co-deposition followed by extrusion process. The heat treatment processing, microstructures and mechanical properties of the as-processed composite were investigated. The well-bonded SiC/Al interfac

A model for the yield strength of overag

A model for the yield strength of overaged Al–Zn–Mg–Cu alloys

✍ M.J. Starink; S.C. Wang 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 675 KB

Investigation of quench sensitivity of h

Investigation of quench sensitivity of high strength Al–Zn–Mg–Cu alloys by time–temperature-properties diagrams

✍ Shengdan Liu; Qimin Zhong; Yong Zhang; Wenjun Liu; Xinming Zhang; Yunlai Deng 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 454 KB

Microstructure and properties of a new s

Microstructure and properties of a new super-high-strength Al–Zn–Mg–Cu alloy C912

✍ Y.L Wu; F.H Froes; A Alvarez; C.G Li; J Liu 📂 Article 📅 1997 🏛 Elsevier Science ⚖ 832 KB

Using scanning electron microscopy SEM and transmission electron microscopy TEM , the mi-( ) crostructure of a new super-high-strength Al᎐Zn ᎐Mg᎐Cu alloy C912 has been investigated. Compared with some other high-strength aluminum alloys, the C912 alloy exhibits higher strength and good stress-corros