✦ LIBER ✦

High strain rate properties of aramid and polyethylene woven fabric composites

✍ Scribed by J. Rodriguez; I.S. Chocron; M.A. Martinez; V. Sánchez-Gálvez

Book ID: 108046565
Publisher: Elsevier Science
Year: 1996
Tongue: English
Weight: 816 KB
Volume: 27
Category: Article
ISSN: 1359-8368
DOI: 10.1016/1359-8368(95)00036-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Tribological properties of woven para-ar

Tribological properties of woven para-aramid fabrics and their constituent yarns

✍ S. Rebouillat 📂 Article 📅 1998 🏛 Springer 🌐 English ⚖ 1001 KB

Fabrication, microstructures and High-St

Fabrication, microstructures and High-Strain-Rate properties of TiC-reinforced titanium matrix composites

✍ Hyunho Shin; Hong-Lae Park; Soon-Nam Chang 📂 Article 📅 2002 🏛 TechnoPress 🌐 English ⚖ 621 KB

Plasma penetration depth and mechanical

Plasma penetration depth and mechanical properties of atmospheric plasma-treated 3D aramid woven composites

✍ X. Chen; L. Yao; J. Xue; D. Zhao; Y. Lan; X. Qian; C.X. Wang; Y. Qiu 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 661 KB

Woven fabric composites—part I: Predicti

Woven fabric composites—part I: Predictions of homogenized elastic properties and micromechanical damage analysis

✍ Jaehyon Choi; Kumar K. Tamma 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 143 KB

High strain rate properties of balanced

High strain rate properties of balanced angle-ply graphite/epoxy composites

✍ Amol Jadhav; Eyassu Woldesenbet; Su-Seng Pang 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 318 KB

Tensile, flexural and interlaminar shear

Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites

✍ K. Sabeel Ahmed; S. Vijayarangan 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 821 KB

Effect of stacking sequence on tensile, flexural and interlaminar shear properties of untreated woven jute and glass fabric reinforced polyester hybrid composites has been investigated experimentally. Laminates were fabricated by hand lay-up technique in a mold and cured under light pressure for 1 h