𝔖 Bobbio Scriptorium
✦   LIBER   ✦

High-speed melt spinning of various grades of polylactides

✍ Scribed by G. Schmack; B. Tändler; G. Optiz; R. Vogel; H. Komber; L. Häußler; D. Voigt; S. Weinmann; M. Heinemann; H.-G. Fritz

Publisher
John Wiley and Sons
Year
2003
Tongue
English
Weight
126 KB
Volume
91
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Five kinds of polylactides (PLAs), with different D‐lactide contents and tacticities, were subjected to high‐speed melt‐spinning experiments. In addition to stereochemical purity, the PLA types differed in molecular mass and molecular mass distribution. The properties of the different PLA materials were characterized by thermogravimetry, differential scanning calorimetry, dynamic mechanical analysis, size exclusion chromatography, and ^1^H‐NMR and ^13^C‐NMR spectroscopy. The material was spun with a high‐speed spinning process within the range 2000–5000 m/min. The physical and tensile properties of the fibers were determined. The maximum tensile properties of the fibers were a 300 MPa tenacity at an elongation at break of 30% and a tensile modulus of 6.8 GPa. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 800–806, 2004

📜 SIMILAR VOLUMES

High speed melt spinning of poly(L-lacti
High speed melt spinning of poly(L-lactic acid) filaments
✍ Khaled Mezghani; J. E. Spruiell 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 198 KB 👁 2 views

Poly(L-lactic acid) filaments were prepared by high speed melt spinning at take-up velocities up to 5000 m/min. The crystallinity, birefringence, tensile strength, Young's modulus and yield strength all exhibit maxima at take-up velocities between 2000 and 3000 m/min. The boiling water shrinkage exh

Necking behavior in high-speed melt spin
Necking behavior in high-speed melt spinning of poly(ethylene terephthalate)
✍ Jung Sun Kim; Sang Yong Kim 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 299 KB 👁 2 views

The necking behavior in the high-speed melt-spinning process of poly(ethylene terephthalate) (PET) was analyzed using a mathematical simulation under a nonisothermal condition. A constitutive model into which the strain-rate dependence of viscosity and the strain-hardening effect are incorporated wa

Analysis of necking in high-speed spinni
Analysis of necking in high-speed spinning
✍ Jayakrishnan S. Raghavan; John A. Cuculo 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 155 KB 👁 2 views

A peculiar deformation in the threadline region resembling the "necking" associated with cold drawing of some metals and many polymeric fibers is observed when polyethylene terephthalate (PET) and other semicrystalline polymers are meltspun at high speeds. This phenomenon is often referred to as the

Microstructural investigation of high-sp
Microstructural investigation of high-speed melt-spun nylon 6 fibers produced with variable spinning speeds
✍ S.-Y. Kwak; J. H. Kim; S. Y. Kim; H. G. Jeong; I. H. Kwon 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 198 KB 👁 1 views

The structural details of high-speed melt-spun nylon 6 fibers at spinning speeds ranging from 4500 to 6100 m/min were investigated by solid-state proton nuclear magnetic resonance ( 1 H NMR) spectroscopy, density and birefringence measurements, differential scanning calorimetry (DSC), and X-ray diff

Biodegradable fibers of poly(L-lactide)
Biodegradable fibers of poly(L-lactide) produced by high-speed melt spinning and spin drawing
✍ G. Schmack; B. Tändler; R. Vogel; R. Beyreuther; S. Jacobsen; H.-G. Fritz 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 254 KB 👁 1 views

A polylactide (PLA type LA 0200 K) was spun in high-speed melt spinning and spin drawing processes. The fibers were characterized with regard to the degree of crystallinity, the orientation, and the textile physical properties. The polymer was produced by a reactive extrusion polymerization process,