𝔖 Bobbio Scriptorium
✦   LIBER   ✦

High-speed finite element computation in 3D acoustical analysis of vocal tract

✍ Scribed by Koji Sasaki; Nobuhiro Miki; Hiroki Matsuzaki; Yoshikazu Miyanaga


Publisher
John Wiley and Sons
Year
2003
Tongue
English
Weight
939 KB
Volume
86
Category
Article
ISSN
1042-0967

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

This paper discusses computational techniques and the way to provide the boundary conditions in order to derive the transfer function of the vocal tract by a three‐dimensional finite element analysis of vocal tract acoustic analysis in a short time. With regard to computational techniques, a solution of the simultaneous equations by successive use of iterative solution, taking the solution at a certain frequency as the initial value, and the use of the finite difference method in part of the analysis domain, are discussed. With regard to the method of providing the boundary condition, the boundary condition at the lip radiating section is discussed. By combining the techniques proposed in this paper, the derivation of the vocal tract transfer function can be accelerated by a factor of as much as 14. Β© 2003 Wiley Periodicals, Inc. Electron Comm Jpn Pt 3, 86(11): 21–29, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/ecjc.10091


πŸ“œ SIMILAR VOLUMES


Finite element analysis of severe deform
✍ Y.H. Ji; J.J. Park; W.J. Kim πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 849 KB

Deformation mechanics of differential-speed rolling with a high speed ratio between the upper and lower rolls, which was found to be effective in producing very fine-grained microstructure in Mg-3Al-1Zn sheets, has been investigated by means of the rigid-plastic finite element method. The shear stra

Analysis of 3D frequency-selective struc
✍ Zheng Lou; Jian-Ming Jin πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 English βš– 177 KB

## Abstract A high‐order vector finite‐element method (FEM) is presented for the analysis of 3D frequency‐selective structures (FSSs). The asymptotic waveform evaluation (AWE) technique is combined with the FEM to perform fast frequency and angular sweeps. Reflection/transmission characteristics of

Evaluation of the local quality of stres
✍ Eric Florentin; Laurent Gallimard; Jean-Pierre Pelle πŸ“‚ Article πŸ“… 2002 πŸ› Elsevier Science 🌐 English βš– 396 KB

This article deals with the local quality on stresses produced during finite element analysis in 3D linear elasticity. We use an estimation technique based on the concept of error in constitutive relation, which yields excellent estimates of the local errors without requiring the approximate calcula