High resolution capillary GC-MS analysis of low molecular weight organic compounds in municipal wastewater
✍ Scribed by Nguyen, Dang-Khoa ;Bruchet, Auguste ;Arpino, Patrick
- Publisher
- John Wiley and Sons
- Year
- 1994
- Tongue
- English
- Weight
- 727 KB
- Volume
- 17
- Category
- Article
- ISSN
- 0935-6304
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
High resolution capillary gas chromatography–mass spectrometry has been used in combination with various sample preparation methods to analyze a wide range of low molecular weight organic contaminants in municipal wastewaters. Volatile organic compounds were extracted using a purge and trap concentrator connected directly to a wide bore DB‐624 capillary column. Because of the high organic load in wastewater samples, this method was preferred to the more sensitive closed loop stripping technique which suffered from competition effects and insufficient adsorbent capacity. Volatile and semi‐volatile base/neutral compounds and acids were extracted with dichloromethane at pH 11 and pH 2, respectively, or were recovered using a simultaneous distillation‐extraction procedure. Acidic compounds were subsequently derivatized using diazomethane methylation. Both fractions were separated with a 30m DB‐5ms capillary column. Specific ionic substances (LAS, NTA, EDTA) were isolated by solid‐phase extraction then derivatized with diazomethane (LAS) or acetyl chloride in n‐butanol (NTA, EDTA) before GC–MS analysis.
This array of techniques enabled the identification of more than 150 organic contaminants in the influent of a municipal wastewater treatment plant in northern suburban Paris. The individual concentrations of these contaminants ranged from < 0.1 μg/l to 5.7 mg/l.