High critical current YBCO films using advanced TFA-MOD process

✍ Scribed by Yoshitaka Tokunaga; Hiroshi Fuji; Ryo Teranishi; Junko Matsuda; Sigenobu Asada; Atsushi Kaneko; Tetsuji Honjo; Teruo Izumi; Yuh Shiohara; Yutaka Yamada; Kiyoshi Murata; Yasuhiro Iijima; Takashi Saitoh; Tomotaka Goto; Atsuya Yoshinaka; Akimasa Yajima

• Publisher: Elsevier Science
• Year: 2004
• Tongue: English
• Weight: 308 KB
• Volume: 412-414
• Category: Article
• ISSN: 0921-4534
• DOI: 10.1016/j.physc.2003.12.077

✦ Synopsis

As a method of the fabrication process of YBa 2 Cu 3 O 7Àx (YBCO) coated conductors, the metalorganic deposition (MOD) process using metal trifluoroacetates (TFA) has been considered to be a strong candidate as a low cost fabrication process for coated conductors with high J c .

In the case of the MOD process using the TFA salts for the all three elements, it requires several tens hours in the calcination process for each single coated film to minimize the generation of pores in the film. In order to shorten the calcination time, a new combination of starting materials was developed. In this study, the new heating process for these new materials has been investigated. Consequently, the calcination time was shortened to be about 17%. Also, the overall transport I c of 292 A and the J c value of 2.0 MA/cm 2 were achieved with 1.48 lm in thickness at 77 K in selffield.