environments was investigated. The corrosion rate is higher under 'outlet' conditions at 700°C compared to standard conditions at 650°C and 'inlet' conditions at 600°C. The corrosion potential increases with time when a protective corrosion layer is formed. Eventually it reaches a more positive pote
Heterogeneous basic catalysts for the transesterification and the polycondensation reactions in PET production from DMT
✍ Scribed by M. Di Serio; R. Tesser; A. Ferrara; E. Santacesaria
- Publisher
- Elsevier Science
- Year
- 2004
- Tongue
- English
- Weight
- 136 KB
- Volume
- 212
- Category
- Article
- ISSN
- 1381-1169
No coin nor oath required. For personal study only.
✦ Synopsis
The use of heterogeneous basic catalysts in both dimethyl terephthalate (DMT) transesterification with ethylene glycol (EG) and successive polycondensation of the obtained prepolymer, was investigated. To this end, Al 2 O 3 , calcined Al-Mg hydrotalcite with different Al/(Al + Mg) theoretical atomic ratios, and MgO were tested in transesterification and polycondensation reactions and characterised. It was shown that both the calcined Al-Mg hydrotalcites and magnesium oxides are active in the DMT transesterification reaction with EG and in the successive prepolymer polycondensation. The observed activities were compared to the results of characterisations of catalysts. Moreover, the obtained PETs have chemical and physical properties very close to those of commercial samples.
📜 SIMILAR VOLUMES