✦ LIBER ✦

Heat treatment and wear characteristics of Al/SiCp composites fabricated by duplex process

✍ Scribed by Sug Won Kim; Ui Jong Lee; Sang Won Han; Dong Keun Kim; K Ogi

Publisher: Elsevier Science
Year: 2003
Tongue: English
Weight: 643 KB
Volume: 34
Category: Article
ISSN: 1359-8368
DOI: 10.1016/s1359-8368(03)00081-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fabrication and characterization of Al/S

Fabrication and characterization of Al/SiCp composites by CAR process

✍ Sajjad Amirkhanlou; Roohollah Jamaati; Behzad Niroumand; Mohammad Reza Toroghine 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 838 KB

Effect of sliding distance on the wear a

Effect of sliding distance on the wear and friction behavior of as cast and heat-treated Al–SiCp composites

✍ R.N. Rao; S. Das 📂 Article 📅 2011 🏛 Elsevier Science ⚖ 857 KB

Friction and wear characteristics of Al–

Friction and wear characteristics of Al–Cu/C composites synthesized using partial liquid phase casting process

✍ S.C Lim; M Gupta; W.B Ng 📂 Article 📅 1997 🏛 Elsevier Science ⚖ 342 KB

During the sliding of aluminium alloys dispersed with graphite particulates, a layer of graphite is usually present at the sliding interface. This tribo-layer significantly reduces the amount of direct metal-to-metal contact, giving rise to low friction and a low rate of wear, making these composite

Characteristic properties of Al–Cu–SiCp

Characteristic properties of Al–Cu–SiCp and Al–Cu–B4Cp composites produced by hot pressing method under nitrogen atmosphere

✍ Fevzi Bedir 📂 Article 📅 2007 🏛 Elsevier Science ⚖ 623 KB

Fabrication and Characteristics of Carbo

Fabrication and Characteristics of Carbon Nanofiber-Reinforced Carbon/Carbon Composites by Fast Catalytic Infiltration Processes

✍ Jin-Cao Zhang; Rui-Ying Luo; Xiao-Wen Wu; Qiang Li 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 686 KB

Fabrication and characteristics of in si

Fabrication and characteristics of in situ Al12W particles reinforced aluminum matrix composites by reaction sintering

✍ Y.C. Feng; L. Geng; A.B. Li; Z.Z. Zheng 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 326 KB

A novel in situ Al12W particles reinforced aluminum matrix composite was synthesized by reaction sintering of tungsten and aluminum powders and followed by hot extrusion. The microstructures were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The tensile tests of co