✦ LIBER ✦

Heat transfer issues in foam extrusion

✍ Scribed by David B. Todd

Publisher: John Wiley and Sons
Year: 2003
Tongue: English
Weight: 102 KB
Volume: 22
Category: Article
ISSN: 0730-6679
DOI: 10.1002/adv.10035

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Heat transfer and microstructure in extr

Heat transfer and microstructure in extrusion blowmolding

✍ Musa R. Kamal; Dilhan Kalyon 📂 Article 📅 1983 🏛 Society for Plastic Engineers 🌐 English ⚖ 602 KB

Heat Transfer in Polypropylene-Based Foa

Heat Transfer in Polypropylene-Based Foams Produced Using Different Foaming Processes

✍ Marcelo Antunes; José Ignacio Velasco; Vera Realinho; Antonio B. Martínez; Migue 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 778 KB

Effect of heat load on heat transfer in

Effect of heat load on heat transfer in a foam layer

✍ A. N. Khoze; Yu. I. Sharov 📂 Article 📅 1972 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 134 KB

Heat transfer during air flow in aluminu

Heat transfer during air flow in aluminum foams

✍ Simone Mancin; Claudio Zilio; Alberto Cavallini; Luisa Rossetto 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 963 KB

This paper presents experimental heat transfer coefficients measured during air flow heating in seven different aluminum open-cell foam samples with different number of pores per inch (PPI), porosity and foam core height under a wide range of air mass velocity. Three imposed heat fluxes are consider

Conductive Heat Transfer in Metallic/Cer

Conductive Heat Transfer in Metallic/Ceramic Open-Cell Foams

✍ R. Coquard; M. Loretz; D. Baillis 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 454 KB 👁 2 views

Characterization of Heat and Momentum Tr

Characterization of Heat and Momentum Transfer in Sintered Metal Foams

✍ O. Reutter; J. Sauerhering; T. Fend; R. Pitz-Paal; S. Angel 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 284 KB 👁 2 views

## Abstract In this study, metal foams made by the Slip Reaction Foam Sintering (SRFS)‐process are investigated concerning their thermophysical and permeability properties. Since the foam is to be applied as a functional and structural element in the effusion air cooling system of a stationary gas