✦ LIBER ✦

Heat transfer from impinging slot jets of air

✍ Scribed by D. G. Arganbright; H. Resch; J. R. Olson

Publisher: Springer
Year: 1979
Tongue: English
Weight: 870 KB
Volume: 13
Category: Article
ISSN: 0043-7719
DOI: 10.1007/bf00350171

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Heat transfer from impinging slot jets o

Heat transfer from impinging slot jets of air part 1: Aerodynamic characteristics of free jets

✍ D. G. Arganbright; H. Resch; J. R. Olson 📂 Article 📅 1978 🏛 Springer 🌐 English ⚖ 596 KB

Experimental study of convective heat tr

Experimental study of convective heat transfer under arrays of impinging air jets from slots and circular holes

✍ M. Can; A. B. Etemog✓lu; A. Avci 📂 Article 📅 2002 🏛 Springer-Verlag 🌐 English ⚖ 169 KB

Air jet impingement heat transfer from m

Air jet impingement heat transfer from modified surfaces

✍ L.G. Hansen; B.W. Webb 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 612 KB

Experiments were performed to characterize heat transfer to a normally impinging air jet from surfaces modified with arrays of fin-type extensions. Heat transfer enhancement for six fin geometries was evaluated by comparison with results for a smooth, flat surface. Average Nusseh numbers (Nu) and ov

Pulsed air jet impingement heat transfer

✍ L.F.A. Azevedo; B.W. Webb; M. Queiroz 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 688 KB

Heat transfer characteristics of a micro

Heat transfer characteristics of a micro-scale impinging slot jet

✍ Kyo Sung Choo; Young Jik Youn; Sung Jin Kim; Dae Hee Lee 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 658 KB

In the present study, heat transfer characteristics of a micro-scale slot jet impinging on a heated flat plate are experimentally investigated. The effects of Reynolds numbers (Re = 150-5000) and nozzle-to-plate spacings (Z/d h = 0.5-10) on the Nusselt number are considered. Based on the experimenta

Heat transfer under multiple slot jets i

Heat transfer under multiple slot jets impinging on a permeable moving surface

✍ S. Polat; W. J. M. Douglas 📂 Article 📅 1990 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 875 KB

Local and average heat transfer were measured for a system of multiple jets impinging on a moving permeable surface at which there may be throughflow. Multiple jets were confined by a hood, as is required industrially for thermal efficiency. Exhaust ports located symmetrically between the jet nozzle