Heat pump dryer is a complex system because of the interaction of heat and mass transfer of the working fluids. Since the system cannot be completely close, ambient conditions (temperature and humidity) influence the performance of the system. To investigate the performance of the heat pump dryer th
HEAT PUMP DRYER PART 2: RESULTS OF THE SIMULATION
β Scribed by S. Prasertsan; P. Saen-Saby; P. Ngamsritrakul; G. Prateepchaikul
- Publisher
- John Wiley and Sons
- Year
- 1997
- Tongue
- English
- Weight
- 458 KB
- Volume
- 21
- Category
- Article
- ISSN
- 0363-907X
No coin nor oath required. For personal study only.
β¦ Synopsis
Heat pump dryer characteristics of four configurations, two open and two closed systems, are presented. The results are based on the simulation models developed in Part 1. Emphasis is given to the effects of ambient conditions, recirculating air ratio and evaporator bypass air ratio on the system performance. The criteria for evaluating the system performance are the specific moisture extraction rate (SMER), the moisture extraction rate (MER) and the coefficient of performance (COP). It was found that the ambient conditions and dryer efficiency play an important role in the system behaviour. Optimum performance achieved for one ambient condition cannot be assumed optimum for the others. The recirculating air ratio substantially affects the system performance while the evaporator bypass air ratio shows insignificant effect.
π SIMILAR VOLUMES
Heat pump dryer (HPD) performance described by computer simulation results in Parts 1 and 2 of this series of papers is here verified by experiments. An HPD designed to be operated in four configurations-two open systems and two partially closed systems-has been built. The variables in the experimen
In this study, a mathematical model of a solar-assisted heat pump system with latent heat energy storage for residential heating in Turkey was developed. The model consists of dynamic and heat transfer relations concerning the fundamental equipment in the system such as solar collector, latent therm
This research is concerned with the technology of heat pump assisted drying of specialty crops. A simplified procedure for modelling the performance of a low temperature heat pump dryer was developed. The system modelled consists of a vapour compression heat pump coupled to a continuous cross flow b
The experimental and predicted performance data of a heat pump dryer system is reported. Chopped alfalfa was dried in a cabinet dryer in batches and also by emulating continuous bed drying using two heat pumps operating in parallel. Results showed that alfalfa was dried from an initial moisture cont