✦ LIBER ✦

Health and safety aspects of thin-film photovoltaic cell manufacturing technologies

✍ Scribed by Fthenakis, V. M. ;Moskowitz, P. D.

Publisher: Wiley (John Wiley & Sons)
Year: 1988
Tongue: English
Weight: 602 KB
Volume: 7
Category: Article
ISSN: 0278-4513
DOI: 10.1002/prsb.720070408

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Thin-film (CIS) photovoltaics: a consort

Thin-film (CIS) photovoltaics: a consortium approach to technology development and manufacturing

✍ Mohan S. Misra 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 124 KB 👁 1 views

Based on the various laboratory experiments, polycrystalline thin-®lm photovoltaics such as copper indium diselenide (CIS)-based alloys have exhibited device eciencies higher than 16 . 0% as well as the potential for low production costs of $1 . 00 W À 1 for the monolithically integrated modules. Ho

Manufacture of amorphous silicon and GaA

Manufacture of amorphous silicon and GaAs thin film solar cells: An identification of potential health and safety hazards

✍ V.M. Fthenakis; P.D. Moskowitz; J.C. Lee 📂 Article 📅 1984 🏛 Elsevier Science ⚖ 758 KB

Technological and economic aspects of so

Technological and economic aspects of solar cell manufacture

✍ Rahul Basu 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 374 KB

Thin film solar cells and spray technolo

Thin film solar cells and spray technology: The future of the photovoltaics sector

✍ Michel Savelli 📂 Article 📅 1984 🏛 Elsevier Science ⚖ 311 KB

Health, safety and environmental aspects

Health, safety and environmental aspects of the use of cadmium compounds in thin film PV modules

✍ M.H. Patterson; A.K. Turner; M. Sadeghi; R.J. Marshall 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 325 KB

Environmental, health and safety issues

Environmental, health and safety issues associated with the manufacture and use of II–VI photovoltaic devices

✍ P.D. Moskowitz; V.M. Fthenakis 📂 Article 📅 1991 🏛 Elsevier Science ⚖ 703 KB

Federal and state agencies have classified cadmium and selenium compounds as hazardous. Consequently, facilities using these materials are subject to various regulations and guidelines developed by these agencies. The intent of these guidelines is to protect worker and public health from accidental