✦ LIBER ✦

Healing of cracks in carbon fibre-PEEK composites

✍ Scribed by P. Davies; W. Cantwell; H. H. Kausch

Publisher: Springer
Year: 1989
Tongue: English
Weight: 263 KB
Volume: 8
Category: Article
ISSN: 0261-8028
DOI: 10.1007/bf00721480

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Delamination from thin starter films in

Delamination from thin starter films in carbon fibre/PEEK composites

✍ P. Davies; W. J. Cantwell; H. H. Kausch 📂 Article 📅 1990 🏛 Springer 🌐 English ⚖ 198 KB

A preparation technique for PEEK/carbon

A preparation technique for PEEK/carbon fibre model composites

✍ A. Rose; M. J. Folkes 📂 Article 📅 1994 🏛 Springer 🌐 English ⚖ 652 KB

Morphology in PEEK-carbon fibre composit

Morphology in PEEK-carbon fibre composites observed in transmission electron microscopy

✍ El Mostapha Saktoun; Alain Boudet; Bernard Chabert; Bruno Hilaire; Daniel Bouvar 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 384 KB

Tribo-investigation of PEEK-short carbon

Tribo-investigation of PEEK-short carbon fibre composites in severe testing conditions

✍ Lal, Babu ;Mathur, Gyanesh Narayan 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 686 KB

Normal and oblique hypervelocity impacts

Normal and oblique hypervelocity impacts on carbon fibre/peek composites

✍ Chantel G. Lamontage; Gerald N. Manuelpillai; Emma A. Taylor; Roderick C. Tennys 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 1006 KB

A series of normal and oblique hypervelocity impact tests were performed on carbon tibre/PEEK composite specimens using the Light Gas Gun facilities at the University of Kent at Canterbury. The tests were conducted on 16 ply and 24 ply targets, using 1 mm and 2 mm aluminum projectiles, at velocities

Fatigue damage modelling of PEEK short f

Fatigue damage modelling of PEEK short fibre composites

✍ A. Avanzini; G.Donzella; D. Gallina 📂 Article 📅 2011 🏛 Elsevier 🌐 English ⚖ 454 KB

In the present research the fatigue damage evolution of a PEEK based composite was studied. Examined material consisted of a PEEK matrix reinforced by carbon micro-fibres with addition of fillers such as graphite and PTFE. Fatigue tests in load control were carried out up to 10 6 cycles at different