## Abstract The higher homologues for isotactic (it) poly(1‐alkylethylene)s (from it‐poly(1‐dodecylethylene) to it‐poly(1‐eicosylethylene)) show three polymorphic modifications. The modification of highest order crystallizes in an orthorhombic structure (modification I). This modification is formed
Haupt- und seitenkettenkristallinität bei isotaktischen poly(1-alkyläthylen)en, 1. Thermoanalytische und röntgenographische untersuchungen an den höheren homologen
✍ Scribed by Trafara, Gundolf ;Koch, Reimer ;Blum, Klaus ;Hummel, Dieter
- Publisher
- Wiley (John Wiley & Sons)
- Year
- 1976
- Weight
- 295 KB
- Volume
- 177
- Category
- Article
- ISSN
- 0025-116X
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Die Haupt‐ und Seitenkettenkristallinität bei den isotaktischen Poly(1‐alkyläthylen)en vom Poly(1‐dodecyläthylen) bis zum Poly(1‐eicosyläthylen) wurden thermoanalytisch und röntgenographisch untersucht. Die DSC‐Kurven der aus der Schmelze abgeschreckten Proben zeigen 3 Umwandlungspeaks 1. Ordnung. Bei niedrigen Temperaturen liegt in den Proben eine Modifikation vor, bei der die Seitenketten dicht gepackt parallel angeordnet sind. Erwärmt man die Proben, so findet eine Modifikationsumwandlung statt. Es bildet sich eine Modifikation aus, bei der die Hauptketten Helixkonformation annehmen und die Seitenketten rhombisch kristallisieren. Bei den höheren homologen Poly(1‐alkyläthylen)en überwiegt mit zunehmender Anzahl von CH~2~‐Gruppen in den Seitenketten die Seitenkettenkristallinität.
📜 SIMILAR VOLUMES
## Abstract __Isotactic__ poly(1‐eicosylethylene) shows three polymorphic modifications. The orthorhombic modification I is formed during melt crystallization at a cooling rate ϕ<2,5K.s^−1^. The dimensions of the unit cell are calculated to be __a__=0,75 nm, __b__=8,8 nm and __c__=0,67 nm. The heat
## Abstract Crystallization of the higher homologues of poly(alkylethylene)s containing 12, 13, 14, 16 and 20 C‐atoms in the side chains is investigated varying the temperature and duration of crystallization. On cooling the samples slowly from the melt to about 5 to 10 K below the melting temperat