✦ LIBER ✦

Hantzsch reaction in urea-formaldehyde resins

✍ Scribed by V. V. Kotova; V. Z. Maslosh; T. M. Pekhtereva; A. Yu. Chervinskii

Book ID: 111462372
Publisher: SP MAIK Nauka/Interperiodica
Year: 2008
Tongue: English
Weight: 165 KB
Volume: 81
Category: Article
ISSN: 1070-4272
DOI: 10.1134/s1070427208050388

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fibers from urea–formaldehyde resins

✍ V. Rogers-Gentile; G. C. East; J. E. Mcintyre; P. Snowden 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 217 KB

The preparation of fibers from aqueous urea-formaldehyde resins has been investigated; a dry spinning process has been developed based on the extrusion of catalyzed resin into a drying chamber at 180 -220°C, producing a multifilament yarn at spinning speeds of up to 600 m/min. A range of UF filament

Colloidal aggregation of aminoplastic po

Colloidal aggregation of aminoplastic polycondensation resins: Urea–formaldehyde versus melamine–formaldehyde and melamine–urea–formaldehyde resins

✍ A. Despres; A. Pizzi 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 746 KB

Hydroxymethylation and polycondensation

Hydroxymethylation and polycondensation reactions in urea–formaldehyde resin synthesis

✍ Peep Christjanson; Tõnis Pehk; Kadri Siimer 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 110 KB

Rheokinetics of urea-formaldehyde resins

Rheokinetics of urea-formaldehyde resins gelation

✍ Sergei G. Kulichikhin; Veronika B. Voit; Alexandre Ya. Malkin 📂 Article 📅 1996 🏛 Springer-Verlag 🌐 English ⚖ 419 KB

The structure of urea—formaldehyde resin

The structure of urea—formaldehyde resins

✍ Sivananda S. Jada 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 931 KB

## Synopsis Fourier transform infrared (FTIR) spectroscopy has been used as a modern analytical tool to elucidate the structure of urea-formaldehyde (UF) resins. Several low molecular weight condensation products of urea and formaldehyde were synthesized and characterized. Structural differences w

Uron and uron–urea-formaldehyde resins

✍ C. Soulard; C. Kamoun; A. Pizzi 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 476 KB

The favored pH ranges for the formation of urons in urea-formaldehyde (UF) resins preparation were determined, these being at pH's higher than 6 and lower than 4 at which the equilibrium urons £ N,NЈ-dimethylol ureas are shifted in favor of the cyclic uron species. Shifting the pH slowly during the