𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Growth of aerosol particles in a steam environment and its effect on removal

✍ Scribed by M.S. Hoseyni; A.T. Wassel

Publisher
Elsevier Science
Year
1986
Tongue
English
Weight
477 KB
Volume
97
Category
Article
ISSN
0029-5493

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Diffusion-Controlled Particle Growth and
Diffusion-Controlled Particle Growth and its Effects on Nucleation in Stirred Emulsion Polymerisation Reactors
✍ Shahriar Sajjadi πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 155 KB

## Abstract **Summary:** Particle formation and growth in the batch emulsion homo‐polymerisation of styrene and methyl methacrylate monomers under diffusion‐controlled conditions were studied. The polymerisations started with two stratified layers of a monomer and water containing an initiator and

Growth rate dispersion in a continuous s
Growth rate dispersion in a continuous sucrose crystallizer and its effect on CSD
✍ Dr. Bhaskar Sen Gupta; Prof. Dr. Tapas K. Dutta πŸ“‚ Article πŸ“… 1990 πŸ› John Wiley and Sons 🌐 English βš– 592 KB

A Random Crystal Growth (RCG) model is proposed to predict CSD in a continuous MSMPR crystallizer when the crystals exhibit growth rate dispersion. RCG model links two well-hown models of growth rate dispersion, namely the Random Flucluation (RF) and Constant Crystal Growth (CCG) models. Monte Carlo

Effect of hold time and environment on F
Effect of hold time and environment on Fatigue Crack Growth Rate in Ti Alloys
✍ Dr. D. Munz; V. Bachmann πŸ“‚ Article πŸ“… 1980 πŸ› John Wiley and Sons 🌐 English βš– 491 KB

## Abstract In titanium alloys an effect of hold time at maximum load in a cyclic test is observed if K~max~ exceeds the threshold for crack propagation at a constant load test. For tests in air it is possible to predict crack growth rate for a hold time cycle from the crack growth rates from a cyc