𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Grain-refining mechanisms of superheat-treatment of and carbon addition to Mg–Al–Zn alloys

✍ Scribed by Tetsuichi Motegi

Publisher
Elsevier Science
Year
2005
Tongue
English
Weight
594 KB
Volume
413-414
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effect of chemical grain refinement
The effect of chemical grain refinement and low superheat pouring on the structure of NRC castings of aluminium alloy Al–7Si–0.4Mg
✍ M.A. Easton; H. Kaufmann; W. Fragner 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 780 KB

The effect of the addition of Al-5Ti-1B (wt.%) chemical grain refiners on the nuclei generation for a range of superheats during pouring in new rheocasting (NRC) of aluminium alloy Al-7Si-0.4Mg (wt.%) has been investigated. The contributions to the grain density by the grain refiner additions and im

Effects of Sn and Ca additions on micros
Effects of Sn and Ca additions on microstructure, mechanical properties, and corrosion resistance of the as-cast Mg-Zn-Al-based alloy
✍ C. Jihua; C. Zhenhua; Y. Hongge; Z. Fuquan; C. Yingliang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 German ⚖ 972 KB

## Abstract Effects of Sn and Ca additions on microstructure, mechanical properties, and corrosion resistance of the as‐cast Mg‐6Zn‐2Al‐based alloy were investigated by SEM, XRD, tensile tests, electrochemical measurements, etc. The higher the Sn content, the higher the yield strength of the Mg‐6Zn

Characterization of the mechanical prope
Characterization of the mechanical properties changes in an Al–Zn–Mg alloy after a two-step ageing treatment at 70° and 135 °C
✍ Mahmoud Chemingui; Mohamed Khitouni; Karol Jozwiak; Gérard Mesmacque; Abdelwaheb 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 677 KB

Fine-scale precipitation of the g 0 phase and its precursors are essential for the mechanical properties of Al-4.6 wt%Zn-1.2 wt%Mg alloy. This paper deals with an investigation of precipitation in an industrial Al-Zn-Mg alloy at various stages of a conventional two-step ageing treatment at 70 °C and