The introduction of peroxide groups onto carbon black surface was achieved through the trapping of the peroxide radicals formed by the decomposition of polymeric peroxide, such as poly(tetraethy1ene glycol peroxyadipate) (ATPPO), and bis-peroxide, such as l,l'-bis(t-buty1dioxy)cyclohexane (Perhexa-C
Grafting of polymers onto a carbon black surface by the trapping of polymer radicals
โ Scribed by Shinji Hayashi; Atsushi Naitoh; Seiichi Machida; Masaki Okazaki; Kiyotaka Maruyama; Norio Tsubokawa
- Publisher
- John Wiley and Sons
- Year
- 1998
- Tongue
- English
- Weight
- 127 KB
- Volume
- 12
- Category
- Article
- ISSN
- 0268-2605
No coin nor oath required. For personal study only.
โฆ Synopsis
The grafting of polymers onto a carbon black surface based on the trapping of polymer radicals by polycondensed aromatic rings of the surface was investigated. It was found that polymer radicals formed by the thermal decomposition of azo-polymer, peroxy-polymer and 2,2,6,6-tetramethylpiperidinyl-1-oxy-terminated polymer are successfully captured by a carbon black surface to give the corresponding polymer-grafted carbon blacks. The grafting of polymers onto carbon black was also achieved by the trapping of polymer radicals formed by the redox reaction of ceric ions with polymers having hydroxyl groups. It was concluded that surface grafting of polymers onto carbon black is effective when there are few functional groups. The electrical resistance of poly(ethylene oxide) (PEO)-grafted carbon black thus obtained is increased drastically to about 10 4 -10 5 times the initial resistance at the melting point of PEO. This may be due to a widening of the gaps between the carbon black particles by melting of PEO. In addition, it was found that the electrical resistance of a crystalline poly(ethylene imine) (PEI)-grafted carbon black drastically increased to 10 3 -10 4 times the initial resistance in methanol, ethanol and water vapor, but hardly any change in electrical resistance was observed in nhexane or toluene vapor. These results suggest the possibility of detecting a slight change in the crystalline structure of PEI upon absorption of solvent vapor as a large increase in the electrical resistance of the polymer-grafted carbon black.
๐ SIMILAR VOLUMES
The grafting of polystyrene with controlled molecular weight and narrow molecular weight distribution onto the carbon black surface through the trapping of polymer radicals formed by the thermal dissociation of 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO)-terminated polystyrene (PSt-TEMPO) by the ca
The surface grafting of polymers onto a glass plate surface was achieved by the polymerization of vinyl monomers initiated by initiating groups introduced onto the surface. Azo groups were introduced onto the glass plate surface by the reaction of 4,4-azobis(4-cyanopentanoic acid) with isocyanate gr
By use of carbon black containing quaternary ammonium carboxylate (COO-N+Rd groups as catalyst, the anionic ring opening polymerization of P-propiolactone (PL) was carried out a t 5OOC. Although carbon black itself was unable to initiate the polymerization of PL, carbon black containing COO-N+R,j gr
This paper describes the radical graft polymerization of vinyl monomers from glass fiber surface initiated by alkylazo groups introduced onto the fiber surface. The introduction of azo groups onto the glass fiber surface was achieved by reaction of isocyanate groups which were previously attached on