Grafting of a liquid crystal polymer on carbon fibers
β Scribed by Satya Bhama; Samuel I. Stupp
- Publisher
- Society for Plastic Engineers
- Year
- 1990
- Tongue
- English
- Weight
- 603 KB
- Volume
- 30
- Category
- Article
- ISSN
- 0032-3888
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Covalent grafting of mesogenic chains on carbon fiber surfaces was attempted as part of a study on composite materials containing liquid crystal polymer matrices. Grafting in these composite systems is viewed not only as a mechanism to achieve interfacial bonding but also as an approach to modify the interphase physical structure. The synthetic approach to grafting involved the inβsitu polymerization of monomers in the presence of functionalized fibers in order to grow chains covalently attached to the fibers. The chemical mechanism may be viewed as the βtransesterification of car boxy lated fibersβ with acetylated monomers. The monomers used were pimelic acid, pβacetoxybenzoic acid and diacetoxy hydroquinone which are known to yield upon condensation a chemically aperiodic nematic polymer. Evidence for grafting was obtained from Xβray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) analysis on fibers retrieved from composite samples. Interestingly, SEM micrographs of fractured composite specimens containing the mesogenβgrafted fibers reveal excellent wetting and interfacial bonding of a liquid crystalline matrix on the carbon surfaces. Based on theoretical considerations for endβadsorbed macromolecules and the nematogenic nature of the grafted chains we infer that dense layers of adsorbed polymer may form at the interfaces studied. From a materials point of view the in situ growth of liquid crystal polymer chains on fibers may offer mechanisms to control composite properties through both bonding and molecular orientation in interfacial regions.
π SIMILAR VOLUMES
Graft post-polymerization of mesogenic monomers onto fluorine-containing polymer support was initiated by the simultaneous action of vacuum ultraviolet radiation and atomic oxygen. The resultant two-layer structure possesses the combined physical-mechanical properties of the polymer-supporting film
A simple, reproducible method for grafting different carbon fibers (modified and unmodified, high-modulus, and high-tensile) with methacrylic acid is presented. The grafted carbon fibers were characterized by wetting measurements and electrokinetic studies. Scanning electron microscopy micrographs s