The graft copolymerization of acrylic acid (AA) onto guar gum (GOH) was carried out by a peroxydiphosphate (PDP)-silver(I) system. Grafting ratio, efficiency, add-on, and conversion increase upon increasing the concentration of PDP and acrylic acid, whereas they decrease upon increasing the concentr
Graft copolymerization of acrylic acid on cellulose: Reaction kinetics of copolymerization
✍ Scribed by Gülten Gürdağ; Muzaffer Yaşar; M. Ali Gürkaynak
- Publisher
- John Wiley and Sons
- Year
- 1997
- Tongue
- English
- Weight
- 148 KB
- Volume
- 66
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
Acrylic acid (AA) was grafted to cellulose by using ceric ammonium nitrate (CAN) initiator in aqueous nitric acid solution at 30, 50, 70, and 90ЊC during reaction periods of 30 to 180 minutes. About 45% of the AA was polymerized at 90ЊC after 180 minutes. The grafted polymer and homopolymer were isolated by acetone from the reaction mixture, dried, and subjected to Soxhlet extraction with dioxane to separate the homopolymer, poly(acrylic acid), from the graft copolymer. The water absorption capacities and grafting values of grafted cellulose were also determined. The maximum grafting yield was obtained at 30ЊC. It was also observed that polyacrylic acid-grafted cellulose produced at 30ЊC had the highest water retention capacity. The time dependence of AA conversion allowed calculation of first-order reaction rate constants. These rate constants were then used to determine apparent activation energies.
📜 SIMILAR VOLUMES
## Abstract The graft copolymerization of acrylic acid (AA) and 2‐acrylamido 2‐methylpropane sulfonic acid (AASO~3~H) onto cellulose, in the presence or absence of crosslinking agent __N,N__′‐methylene bisacrylamide (NMBA), by using different concentrations of ceric ammonium nitrate (CAN) initiator
## Abstract The effects of mechanochemical treatment on hydroxyethyl cellulose (HEC) and its grafting reaction with acrylic acid (AA) under solvent‐free conditions were studied through a vibratory ball‐milling machine, which was developed in our laboratory. Fourier transform infrared (FTIR) spectro
Acrylate and methacrylate monomers were grafted onto dissolving pulp by the xanthate process. All the nine monomers tested showed a well-defined dependence of conversion on stirring speed. Total conversion and conversion to copolymer vs. agitator speed curves for each monomer were very similar in sh