✦ LIBER ✦

From Microreactor Design to Microreactor Process Design

✍ Scribed by Volker Hessel

Publisher: John Wiley and Sons
Year: 2005
Tongue: English
Weight: 65 KB
Volume: 28
Category: Article
ISSN: 0930-7516
DOI: 10.1002/ceat.200590004

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Geometric design of fluid segments in mi

Geometric design of fluid segments in microreactors using dimensionless numbers

✍ Nobuaki Aoki; Shinji Hasebe; Kazuhiro Mae 📂 Article 📅 2006 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 418 KB

Nanostructure-Driven Analyte–Interface E

Nanostructure-Driven Analyte–Interface Electron Transduction: A General Approach to Sensor and Microreactor Design

✍ Prof. James L. Gole; Eddie C. Goude; William Laminack 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 998 KB

Design and characterization of a prototy

Design and characterization of a prototype enzyme microreactor: Quantification of immobilized transketolase kinetics

✍ S. Matosevic; G. J. Lye; F. Baganz 📂 Article 📅 2009 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 300 KB

On-Microchip Multiphase Chemistry — A Re

On-Microchip Multiphase Chemistry — A Review of Microreactor Design Principles and Reagent Contacting Modes

✍ George N. Doku; Willem Verboom; David N. Reinhouldt; Albert van den Berg 📂 Article 📅 2005 🏛 John Wiley and Sons ⚖ 8 KB

## Abstract For Abstract see ChemInform Abstract in Full Text.

Design of a continuous flow microreactor

Design of a continuous flow microreactor attached to a surface analysis system: First results with an iron oxide based catalyst

✍ M. Muhler; R. Schlögl; S. Eder; G. Ertl 📂 Article 📅 1987 🏛 Elsevier Science ⚖ 49 KB

Catalytic porous ceramic prepared in-sit

Catalytic porous ceramic prepared in-situ by sol-gelation for butane-to-syngas processing in microreactors

✍ Nico Hotz; Nurten Koc; Timo Schwamb; Niklas C. Schirmer; Dimos Poulikakos 📂 Article 📅 2009 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 411 KB 👁 1 views

## Abstract In this study, a novel flow‐based method is presented to place catalytic nanoparticles into a reactor by sol‐gelation of a porous ceramic consisting of Rh/ceria/zirconia nanoparticles, silica sand, ceramic binder, and a gelation agent. This method allows for the placement of a liquid pr