𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Frictional properties of certain metal-polymer composites with self-lubrication

✍ Scribed by D. M. Karpinos; L. I. Tuchinskii; L. R. Vishnyakov; A. V. Stupko; Yu. B. Askochenskii


Publisher
Springer
Year
1982
Tongue
English
Weight
217 KB
Volume
18
Category
Article
ISSN
1573-885X

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Fabrication and tribological properties
✍ Yanjun Wang; Zuomin Liu; Shouren Wang; Liying Yang πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 810 KB

## Abstract A new range of high‐speed steel (HSS)‐based self‐lubrication composites, with an interpenetrating network, were fabricated by infiltrating Pb‐Sn‐Ag ternary solid lubricants into TiC‐reinforced HSS pre‐forms. The microstructure and mechanical properties were investigated before and after

Friction and wear characteristics of PTF
✍ Zhao-Zhu Zhang; Wei-Min Liu; Qun-Ji Xue; Wei-Chang Shen πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 539 KB

Four kinds of polytetrafluoroethylene(PTFE)-based composites, such as pure PTFE, PTFE/30%(v)PbO, PTFE/30%(v)Pb 3 O 4 , and PTFE/30%(v)Cu 2 O composite, were prepared. The friction and wear properties of these metal oxides filled PTFE composites sliding against GCr15 bearing steel in both dry and lub

Effects of lubricating-oil additives on
✍ Zhao-Zhu Zhang; Qun-Ji Xue; Wei-Min Liu; Wei-Chang Shen πŸ“‚ Article πŸ“… 2000 πŸ› John Wiley and Sons 🌐 English βš– 392 KB πŸ‘ 2 views

The effects of lubricating-oil additive zinc dialkyldithiophosphate (ZDDP) on the friction and wear properties of polymers and their composites sliding against GCr15 bearing steel were studied by using an MHK-500 ring-on-block wear tester (Timken wear tester). Then the frictional surfaces of the fri

Synthesis and tribological properties of
✍ Hua Tang; Kesheng Cao; Qiong Wu; Changsheng Li; Xiaofei Yang; Xuehua Yan πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 356 KB

Copper matrix solid self-lubricant composites were prepared by powder metallurgy route using copper powders and NbSe 2 nanofiber or sheet. The tribological properties of the as-prepared materials were estimated by a ball-on-disc on UMT-2 multi-function friction and wear tester under dry conditions i