✦ LIBER ✦

Frictional dynamic contact analysis using finite element nodal displacement description

✍ Scribed by Seung Hwan Ko; Byung Man Kwak

Book ID: 103486978
Publisher: Elsevier Science
Year: 1992
Tongue: English
Weight: 842 KB
Volume: 42
Category: Article
ISSN: 0045-7949
DOI: 10.1016/0045-7949(92)90190-b

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Finite element analysis of pile installa

Finite element analysis of pile installation using large-slip frictional contact

✍ Daichao Sheng; K. Dieter Eigenbrod; Peter Wriggers 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 713 KB

This paper presents some observations on stress and displacement characteristics during the installation and loading of pushed-in piles. A commercial finite element code with the capability of simulating large-strain frictional contact between two or more solid bodies is used to simulate the pile in

Finite element analysis of elastic conta

Finite element analysis of elastic contact problems using differential displacements

✍ E. A. Wilson; B. Parsons 📂 Article 📅 1970 🏛 John Wiley and Sons 🌐 English ⚖ 389 KB

Dynamic finite element analysis of lamin

Dynamic finite element analysis of laminated beams with delamination cracks using contact-impact conditions

✍ Y.W. Kwon; H. Aygunes 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 633 KB

Static contact stress analysis of a spur

Static contact stress analysis of a spur gear tooth using the finite element method, including frictional effects

✍ S. Vijayarangan; N. Ganesan 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 342 KB

Covariant description of contact interfa

Covariant description of contact interfaces considering anisotropy for adhesion and friction.: Part 2. Linearization, finite element implementation and numerical analysis of the model

✍ Alexander Konyukhov; Karl Schweizerhof 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 1022 KB

A covariant description for contact problems including anisotropy for both adhesion and sliding domains is proposed. The principle of maximum dissipation is used to obtain a computational model in the case of quasi-static motions. This second part is first focusing on the linearization of the nonlin

Large strain dynamic analysis using soli

Large strain dynamic analysis using solid and contact finite elements based on a mixed formulation; application to metal forming

✍ S. Cescotto; Y.Y. Zhu 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 355 KB

In this paper mixed finite elements are formulated for dynamic analysis of nonlinear solids undergoing both geometrical and constitutive nonlinearities. The solid and unilateral contact finite elements arc both based on a mixed variational formulation in which stresses, strains and displacements may