✦ LIBER ✦

Friction forces in calculating the drives of conveyors used to process sheet glass

✍ Scribed by I. Kh. Artsis; A. E. Kobrinskii; E. A. Spivak

Publisher: Springer US
Year: 1965
Tongue: English
Weight: 117 KB
Volume: 22
Category: Article
ISSN: 0361-7610
DOI: 10.1007/bf00674390

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Calculating the dynamic characteristics

Calculating the dynamic characteristics of a glass tank moving through channels in relation to sheet glass quality

✍ V. V. Vishnyakov; M. G. Chelidze; E. A. Éngber 📂 Article 📅 1970 🏛 Springer US 🌐 English ⚖ 223 KB

DYNAMIC FE MODEL OF SITTING MAN ADJUSTAB

DYNAMIC FE MODEL OF SITTING MAN ADJUSTABLE TO BODY HEIGHT, BODY MASS AND POSTURE USED FOR CALCULATING INTERNAL FORCES IN THE LUMBAR VERTEBRAL DISKS

✍ S. Pankoke; B. Buck; H.P. Woelfel 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 223 KB

Long-term whole-body vibrations can cause degeneration of the lumbar spine. Therefore existing degeneration has to be assessed as well as industrial working places to prevent further damage. Hence, the mechanical stress in the lumbar spine-especially in the three lower vertebrae-has to be known. Thi

Use of a spread sheet to calculate the c

Use of a spread sheet to calculate the current-density distribution produced in human and rat models by low-frequency electric fields

✍ Francis X. Hart 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 964 KB

The current-density distribution produced inside irregularly shaped, homogeneous human and rat models by low-frequency electric fields is obtained by a two-stage finite-difference procedure. In the first stage the model is assumed to be equipotential. Laplace's equation is solved by iteration in the

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB