✦ LIBER ✦

Friction and wear properties of nitrided and N+-implanted 17-4 PH stainless steel

✍ Scribed by G.M. Ecer; Susan Wood; D. Boes; J. Schreurs

Publisher: Elsevier Science
Year: 1983
Tongue: English
Weight: 903 KB
Volume: 89
Category: Article
ISSN: 0043-1648
DOI: 10.1016/0043-1648(83)90244-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effects of N+ implantation on the we

The effects of N+ implantation on the wear and friction of type 304 and 15-5 PH stainless steels

✍ F.G. Yost; S.T. Picraux; D.M. Follstaedt; L.E. Pope; J.A. Knapp 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 490 KB

In situ friction and wear measurements o

In situ friction and wear measurements of ion-implanted 304 stainless steel in nitrogen and oxygen ambients

✍ L.E. Pope; J.A. Knapp; D.M. Follstaedt 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 1005 KB

The friction and wear of thin titanium n

The friction and wear of thin titanium nitride and silicon nitride coatings on stainless steel at temperatures to 500 °C

✍ D.R.G. Mitchell; F.H. Stott 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 994 KB

Friction, wear and the hardness of boron

Friction, wear and the hardness of boron-implanted 18W4CrIV steel

✍ Peter B. Madakson 📂 Article 📅 1985 🏛 Elsevier Science ⚖ 403 KB

The microstructure of type 304 stainless

The microstructure of type 304 stainless steel implanted with titanium and carbon and its relation to friction and wear tests

✍ D.M. Follstaedt; L.E. Pope; J.A. Knapp; S.T. Picraux; F.G. Yost 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 846 KB

Environmental cracking behaviour of the

Environmental cracking behaviour of the Precipitation hardened stainless steel, 17-4 PH, under applied potential

✍ Ass. Prof. Dr. K. Prasad Rao; Dr. K. S. Raja 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 German ⚖ 638 KB

## Abstract The main aim of the work was to study the effect of applied potentials (both cathodic and anodic) on the environmental cracking behaviour of 17‐4 PH stainless steel material. For this a 1.5 mm thick 17‐4 PH sheet was taken and subjected to 1. solutionising (1050 °C, 45 min, air cooled)