✦ LIBER ✦

Friction and wear of polyethylene-nylon blends

✍ Scribed by H. Yelle; H. Benabdallah; H. Richards

Publisher: Elsevier Science
Year: 1991
Tongue: English
Weight: 922 KB
Volume: 149
Category: Article
ISSN: 0043-1648
DOI: 10.1016/0043-1648(91)90384-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The friction and wear properties of nylo

The friction and wear properties of nylon

✍ Makoto Watanabe; Haruchiyo Yamaguchi 📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 787 KB

Morphological, thermal and rheological p

Morphological, thermal and rheological properties of blends: Polyethylene/nylon-6, polyethylene/nylon-6/(maleic anhydride-g-polyethylene) and (maleic anhydride-g-polyethylene)/nylon-6

✍ Byung Kyu Kim; Sang Yun Park; Sang Jin Park 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 646 KB

Recycling of degraded polyethylene: Blen

Recycling of degraded polyethylene: Blends with nylon 6

✍ F.P. La Mantia; D. Curto 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 970 KB

Friction and wear studies on nylon-6/SiO

Friction and wear studies on nylon-6/SiO2 nanocomposites

✍ Monserrat García; Matthijn De Rooij; Louis Winnubst; Werner E. van Zyl; Henk Ver 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 381 KB

## Abstract Composites of nanometer‐sized silica (SiO~2~) filler incorporated in nylon‐6 polymer were prepared by compression molding. Their friction and wear properties were investigated on a pin on disk tribometer by running a flat pin of steel against a composite disc. The morphologies of the co

The friction and wear of very high molec

The friction and wear of very high molecular weight polyethylene

✍ J. H. Dumbleton; C. Shen 📂 Article 📅 1974 🏛 John Wiley and Sons 🌐 English ⚖ 210 KB 👁 1 views

Friction welding of similar materials: P

Friction welding of similar materials: Polypropylene, high-density polyethylene, and nylon-6

✍ Ching-Bin Lin; Li Cheng Wu; Yu Yao Chen 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 512 KB

## Abstract The effects of spin‐friction pressure and timing on the friction welding between parts of the same materials, PP, HDPE, and nylon‐6, are discussed. The heat‐affected zone is divided into three regions: the plasticized region (Zpl), the partly plasticized region (Zpd), and the undeformed