๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Friction and wear of Cr-doped DLC films under different lubrication conditions

โœ Scribed by Sun, Jian; Fu, Zhi-qiang; Zhang, Wei; Wang, Cheng-biao; Yue, Wen; Lin, Song-sheng; Dai, Ming-jiang

Book ID
120369827
Publisher
Elsevier Science
Year
2013
Tongue
English
Weight
798 KB
Volume
94
Category
Article
ISSN
0042-207X

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Friction and wear behaviors of several p
Friction and wear behaviors of several polymers under oil-lubricated conditions
โœ Zhao-Zhu Zhang; Qun-Ji Xue; Wei-Min Liu; Wei-Chang Shen ๐Ÿ“‚ Article ๐Ÿ“… 1998 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 417 KB ๐Ÿ‘ 2 views

The friction and wear properties of polytetrafluoroethylene (PTFE), polyimide (PI), and polyamide 66 (PA66) sliding against GCr15 bearing steel under both dry and oil-lubricated conditions were studied by using an MHK-500 ring-block wear tester (Timken wear tester), and then Stribeck's curves of PTF

Friction and wear of solid lubricant fil
Friction and wear of solid lubricant films deposited by different types of burnishing
โœ A. Moshkovich; V. Perfilyev; K. Yutujyan; L. Rapoport ๐Ÿ“‚ Article ๐Ÿ“… 2007 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 839 KB

Solid lubricant films based on MoS 2 and WS 2 are widely used for dry air friction and aerospace applications. Different plasma deposition methods are widely used for formation of solid lubricant films on the contact surfaces. One of the simple methods of solid lubricant film deposition is cloth bur