𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Friction and wear behaviors of Al‐SiC‐B 4 C composites produced by pressure infiltration method

✍ Scribed by Soy, U.; Demir, A.; Findik, F.

Book ID
124163482
Publisher
Emerald Group Publishing Limited
Year
2011
Tongue
English
Weight
268 KB
Volume
63
Category
Article
ISSN
0036-8792

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Tribo-surface characteristics of Al–B4C
Tribo-surface characteristics of Al–B4C and Al–SiC composites worn under different contact pressures
✍ K.M. Shorowordi; A.S.M.A. Haseeb; J.P. Celis 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 528 KB

Tribo-surface characteristics of two aluminium metal matrix composites (Al-MMC) of compositions Al-13 vol%B 4 C and Al-13 vol%SiC sliding against a commercial phenolic brake pad have been investigated under dry conditions. The wear tests were carried out using a pin-on-disc type apparatus at a linea

Dry sliding wear behavior of in situ Al–
Dry sliding wear behavior of in situ Al–Al4C3 metal matrix composite produced by mechanical alloying technique
✍ Halil Arik; Yusuf Ozcatalbas; Mehmet Turker 📂 Article 📅 2006 🏛 Elsevier Science ⚖ 570 KB

Dry sliding wear behavior of in situ Al-Al 4 C 3 composite produced by mechanical alloying technique was examined. Mechanically alloyed Al-C powders were compacted at 650 MPa to produce the blanks with the size of ø10 • 25 mm. These blanks were then sintered at 650 °C for 20 h and MMC samples with t