𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Frequency selective surface with dual band switchable reflection and transmission characteristics

✍ Scribed by A. Munir; V. Fusco

Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
261 KB
Volume
51
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A pin diode‐loaded active doubly periodic flat strip FSS is shown to act as a dynamic screen. It is shown that by means of d.c. bias control, we can utilize the screen in, (1) transmission mode as a dual band electromagnetic shutter, or with the inclusion of a ground plane in reflection mode, as (2) a dual band refection canceller, (3) an amplitude shift keying (ASK) spatial modulator. The properties of the FSS are characterized using a specially designed parallel plate waveguide simulator that permits normal incidence excitation of the FSS under test. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 2059–2061, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24547

📜 SIMILAR VOLUMES

Low-frequency miniaturized dual-band fre
Low-frequency miniaturized dual-band frequency selective surfaces with close band spacing
✍ Rong-Rong Xu; Zhi-Yuan Zong; Wen Wu 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 247 KB

## Abstract In this article, a novel miniaturized dual‐band frequency selective surface (FSS) with close band spacing is presented, in which each periodic cell consists of double square loops with different capacitive loadings. The dimension of the unit cell is miniaturized by loading with ceramic

A simple dual-band frequency selective s
A simple dual-band frequency selective surface
✍ L. M. Araújo; R. H. C. Maniçoba; A. L. P. S. Campos; A. G. d'Assunção 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 166 KB

## Abstract Design and experimental investigations are presented for a dual‐band frequency selective surface (FSS) with perfectly conducting rectangular patch elements. The work was developed in two steps. In the first step, two single‐band FSS screens were designed to obtain resonant frequencies a

Dual band frequency selective surface ba
Dual band frequency selective surface based on circular aperture-coupled patches
✍ Hang Zhou; Shao-Bo Qu; Bao-Qin Lin; Jie-Qiu Zhang; Chao Gu; Hua Ma; Zhuo Xu; Pen 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 307 KB

## Abstract A dual band frequency selective surface (FSS) based on circular aperture‐coupled patches is presented. The technique is based on using two same structures with different sizes. A special topology is proposed to arrange the two different sizes structures. Each structure is composed of tw

Compact and high selectivity dual-band d
Compact and high selectivity dual-band dual-mode microstrip BPF with five transmission zeros
✍ Xue-shun Zhang; Bin Liu; Yong-jiu Zhao; Ji-kang Wang; Wen Chen 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 146 KB

## Abstract In this letter, a compact and high selectivity dual‐band dual‐mode microstrip bandpass filter (BPF) with the source‐load coupling is proposed using the single short‐circuited stub‐loaded stepped‐impedance resonator.The resonator can generate two resonant modes in each band. The short‐ci

Reflection characteristics of a metallic
Reflection characteristics of a metallic waveguide grating with rectangular grooves as a frequency-selective reflector
✍ T. Thumvongskul; T. Shiozawa 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 164 KB

## Abstract A proper duty cycle of the grating period which provides the maximum reflection for a metallic waveguide grating with rectangular grooves is found by the mode‐matching approach. For narrowband reflection characteristics, a grating with sufficient numbers of periods and adequately small

Experimental demonstration of a dual-ban
Experimental demonstration of a dual-band electromagnetic band-gap resonator antenna made out of a simple, single-layer frequency selective surface
✍ Yuehe Ge; Karu P. Esselle; Trevor S. Bird 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 354 KB

## Abstract The new concept for realizing a dual‐band electromagnetic band‐gap (EBG) resonator antenna using a simple, single‐sided frequency selective surface (FSS) is demonstrated experimentally.The reversal of the gradient of the FSS reflection coefficient phase response, around a FSS resonance