✦ LIBER ✦

Free and forced vibrations of a Timoshenko beam with any number of translational and rotational springs and lumped masses

✍ Scribed by Wu, Jong-Shyong ;Huang, Chang-Guey

Publisher: John Wiley and Sons
Year: 1995
Tongue: English
Weight: 730 KB
Volume: 11
Category: Article
ISSN: 1069-8299
DOI: 10.1002/cnm.1640110905

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Comments on "Vibration of a Uniform Cant

Comments on "Vibration of a Uniform Cantilever Timoshenko Beam with Translational and Rotational Springs and with a Tip Mass"

✍ S.H. Farghaly 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 87 KB

USE OF THE ANALYTICAL-AND-NUMERICAL-COMB

USE OF THE ANALYTICAL-AND-NUMERICAL-COMBINED METHOD IN THE FREE VIBRATION ANALYSIS OF A RECTANGULAR PLATE WITH ANY NUMBER OF POINT MASSES AND TRANSLATIONAL SPRINGS

✍ J.-S. Wu; S.-S. Luo 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 435 KB

By means of the analytical-and-numerical-combined method (ANCM), the natural frequencies and the corresponding mode shapes of a uniform rectangular flat plate carrying any number of point masses and translational springs are determined. The boundary (supported) conditions of the plate and the magnit

FREE VIBRATION ANALYSIS OF A RECTANGULAR

FREE VIBRATION ANALYSIS OF A RECTANGULAR PLATE CARRYING ANY NUMBER OF POINT MASSES AND TRANSLATIONAL SPRINGS BY USING THE MODIFIED AND QUASI-ANALYTICAL AND NUMERICAL COMBINED METHODS

✍ JONG-SHYONG WU; SHYH-SHIN LUO 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 932 KB

The natural frequencies and the corresponding mode shapes of a uniform rectangular plate carrying any number of rigidly attached (or elastically mounted) point masses and translational springs with various magnitudes and arbitrary locations are determined by using the modified Analytical and Numeric

Free vibrations of solid and hollow wedg

Free vibrations of solid and hollow wedge beams with rectangular or circular cross-sections and carrying any number of point masses

✍ Jong-Shyong Wu; Lieh-Kwang Chiang 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 321 KB

COMMENTS ON “USE OF THE ANALYTICAL AND N

COMMENTS ON “USE OF THE ANALYTICAL AND NUMERICAL COMBINED METHOD IN THE FREE VIBRATION ANALYSIS OF A RECTANGULAR PLATE WITH ANY NUMBER OF POINT MASSES AND TRANSLATIONAL SPRINGS” (WITH AUTHORS' REPLY)

✍ D.R. Avalos; H.A. Larrondo 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 94 KB

We find the title paper both useful and very interesting and we would like to congratulate the authors to their work [1]. On the other hand it is also the purpose of this letter to add some pertinent references which have been inadvertently omitted by the authors. Reference [2] deals with elastical

FREE VIBRATION ANALYSIS OF A CANTILEVER

FREE VIBRATION ANALYSIS OF A CANTILEVER BEAM CARRYING ANY NUMBER OF ELASTICALLY MOUNTED POINT MASSES WITH THE ANALYTICAL-AND-NUMERICAL-COMBINED METHOD

✍ J.-S. Wu; H.-M. Chou 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 268 KB

The natural frequencies and the corresponding mode shapes of a uniform cantilever beam carrying ''any number of'' elastically mounted point masses are determined by means of the analytical-and-numerical-combined method (ANCM). One of the key points for the present method is to replace each spring-ma