𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fracture toughness of unidirectional short-fiber reinforced epoxy composites

✍ Scribed by K. Nikpur; Y.F. Chen; J.L. Kardos

Book ID
107935093
Publisher
Elsevier Science
Year
1990
Tongue
English
Weight
778 KB
Volume
38
Category
Article
ISSN
0266-3538

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Fracture toughness of unidirectional fib
Fracture toughness of unidirectional fibre reinforced composites in MODE II
✍ G.S. Giare πŸ“‚ Article πŸ“… 1984 πŸ› Elsevier Science 🌐 English βš– 767 KB

## A~~act-Expe~mental investigations have been performed on unidirectional glass fibre reinforced/epoxy composites in Mode II (Forward shear) with the presence of crack parallel to the fibres direction through the use of end-cracked beam. A concentrated load at the Centre of the beam produced endi

Interlaminar Fracture Toughness of Carbo
Interlaminar Fracture Toughness of Carbon Fiber/Epoxy Composites using Short Kevlar Fiber and/or Nylon-6 Powder Reinforcement
✍ B. Y. Park; S. C. Kim; B. Jung πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 455 KB πŸ‘ 2 views

## Mode I (G IC ) and Mode II (G IIC ) interlaminar fracture toughness of carbon-fiber/epoxy composites have been investigated as a function of the amount of short Kevlar-29 fiber (SKF) and/or Nylon-6 powder (N6P) between continuous fiber layers. G IIC increased with increasing crack length as a con

Fracture toughness of a short-fiber rein
Fracture toughness of a short-fiber reinforced thermoplastic
✍ W. E. Haskell III; S. P. Petrie; R. W. Lewis πŸ“‚ Article πŸ“… 1983 πŸ› Society for Plastic Engineers 🌐 English βš– 472 KB

## Abstract Thin plates of carbon short‐fiber reinforcement polycarbonate were injection molded. The mold was designed to produce a uniform melt flow across the cavity and an extended knock‐out pin was incorporated to form a circular hole at the center of the molded plate. The elastic constants of