Fracture toughness of titanium foams for medical applications

✍ Scribed by Sadaf Kashef; Alireza Asgari; Timothy B. Hilditch; Wenyi Yan; Vijay K. Goel; Peter D. Hodgson

• Publisher: Elsevier Science
• Year: 2010
• Tongue: English
• Weight: 709 KB
• Volume: 527
• Category: Article
• ISSN: 0921-5093
• DOI: 10.1016/j.msea.2010.08.044

✦ Synopsis

The fracture behavior of titanium open foam is characterized and the R-curves of crack propagation from pre-cracks are measured. The crack growth has been optically observed, the measured initiation toughness, J IC , has been analyzed and the effect of material morphology on the J IC is discussed. The fracture toughness was found to be dependent on the expanding crack bridging zone at the back of the crack tip. The compact tension specimens also have some plastic collapse along the ligaments and it has shown that the titanium foam with a higher relative density is tougher. The non-uniform stressing within the plastic zone at the crack tip and the plastic collapse of cell topology behind the tip was found to be the primary cause of the R-curve behavior in low relative density titanium foams.