✦ LIBER ✦

Formulas for setting the diamond tool in the precision machining of conic surfaces

✍ Scribed by Pedraza-Contreras, J. ;Comejo-Rodriguez, A. ;Cordero-Davila, A.

Book ID: 115329230
Publisher: The Optical Society
Year: 1981
Tongue: English
Weight: 629 KB
Volume: 20
Category: Article
ISSN: 1559-128X
DOI: 10.1364/AO.20.002882

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Model for regulating the shaping precisi

Model for regulating the shaping precision of helicoid surfaces in the design of machine-tool systems

✍ V. M. Makarov 📂 Article 📅 2009 🏛 Allerton Press, Inc. 🌐 English ⚖ 168 KB

Improving the dynamic precision of the t

Improving the dynamic precision of the tool position in a machining center

✍ V. E. Lysov; Ya. I. Peshev 📂 Article 📅 2010 🏛 Allerton Press, Inc. 🌐 English ⚖ 141 KB

Role of the machine tool’s kinematic str

Role of the machine tool’s kinematic structure in ensuring machining precision

✍ V. V. Bushuev; V. V. Molodtsov 📂 Article 📅 2010 🏛 Allerton Press, Inc. 🌐 English ⚖ 150 KB

Role of the machine tool’s kinematic str

Role of the machine tool’s kinematic structure in ensuring machining precision

✍ V. V. Bushuev; V. V. Molodtsov 📂 Article 📅 2010 🏛 Allerton Press, Inc. 🌐 English ⚖ 274 KB

Machine vision inspection for the protru

Machine vision inspection for the protrusion rate of a diamond tool

✍ Bernard C. Jiang; Tsung-Chi Chen 📂 Article 📅 2001 🏛 Society of Manufacturing Engineers 🌐 English ⚖ 607 KB

The performance of a diamond tool is based on the protrusion rate. The protrusion rate inspection is a costly, labor-intensive activity in industry. Normally, about 20 to 35% of the protrusion rate is provided for the final inspection of diamond tools. There are five known methods used for the protr

Kinematic error in the machining of the

Kinematic error in the machining of the conical surfaces of plug valves

✍ V. V. Zimin; M. G. Koksharov; R. N. Sokol 📂 Article 📅 1977 🏛 Springer 🌐 English ⚖ 241 KB