Formation of phenols from the low-temperature fast pyrolysis of Radiata pine (Pinus radiata): Part III. Influence of fluidised bed parameters

✍ Scribed by David A.E. Butt

• Book ID: 104019362
• Publisher: Elsevier Science
• Year: 2006
• Tongue: English
• Weight: 122 KB
• Volume: 76
• Category: Article
• ISSN: 0165-2370
• DOI: 10.1016/j.jaap.2005.12.008

✦ Synopsis

In Parts I and II, the influence of molecular oxygen and substrate moisture on the formation of monomeric phenols was reported for the lowtemperature, bubbling fluidised bed fast pyrolysis of Radiata pine (Pinus radiata). This study reports on the sensitivity of the molecular-oxygenpromoted decomposition process on certain fluid bed parameters. These parameters were bed mass (135 and 200 g) and particle size range (150-210, 210-310 and 310-500 mm). Pyrolysis experimentation was performed on a bench scale fluidised bed reactor, manufactured by RTI Ltd., which was externally heated to 290-295 8C. The fluidising gas consisted of air. For all sand particle size ranges, the inclusion of molecular oxygen in the reaction system did not significantly effect yield or composition of the monomeric phenolic product when the bed mass was 135 g. However, when the bed mass was increased to 200 g, the inclusion of molecular oxygen in the reaction system resulted in a significant increase in the yield of the phenolic product for all sand particle size ranges. Moreover, the yield of individual phenols varied substantially with fluid bed particle size when the bed mass was 200 g, reflecting the apparent dependency of the various decomposition processes on the characteristics of the fluidised bed for pyrolysis performed under such conditions. The maximum yield of monomeric phenols was 5.03% and occurred when the bed mass was 200 g and the corresponding particle size range 310-500 mm.