✦ LIBER ✦

Fluidization of agglomerating particles: influence of the gas temperature and composition on the fluidization of a Li/MgO catalyst

✍ Scribed by E. Marco; A. Santos; M. Menéndez; J. Santamaría

Book ID: 114080064
Publisher: Elsevier Science
Year: 1997
Tongue: English
Weight: 689 KB
Volume: 92
Category: Article
ISSN: 0032-5910
DOI: 10.1016/s0032-5910(97)03215-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The influence of temperature on the qual

The influence of temperature on the quality of gas fluidization

✍ S. Rapagna; P.U. Foscolo; L.G. Gibilaro 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 539 KB

Effect of fluidized bed particle propert

Effect of fluidized bed particle properties and agglomerate shape on the stability of agglomerates in a fluidized bed

✍ Parveen, Flora; Berruti, Franco; Briens, Cedric; McMillan, Jennifer 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 858 KB

Dilute fluidized cracking catalyst parti

Dilute fluidized cracking catalyst particles-gas flow behavior in the riser of a circulating fluidized bed

✍ Yu-Feng Zhang; Hamid Arastoopour 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 794 KB

A bubble model describing the influence

A bubble model describing the influence of internals on gas fluidization

✍ R. Samson; C.E. Brakel; A.M. Scott; K. Chandrasekharan; P. Veenstra 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 477 KB

## Pipes, baffles, perforated plates.

The effect of temperature on particle en

The effect of temperature on particle entrainment rate in a gas fluidized bed

✍ Jeong-Hoo Choi; Kwang-Bae Choi; Peter Kim; Do-Won Shun; Sang-Done Kim 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 490 KB

Influence of pressure, fluidization velo

Influence of pressure, fluidization velocity and particle size on the hydrodynamics of a freely bubbling fluidized bed

✍ J. Wiman; A.E. Almstedt 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 191 KB

The hydrodynamics have been studied in a cold, freely bubbling, pressurized fluidized bed. The bed has a cross-section of 0.2 m;0.3 m and was operated at pressures between 0.1 and 1.6 MPa and at excess gas velocities of 0.2 and 0.6 m/s. The bed material was silica sand with a mean particle diameter