✦ LIBER ✦

Flowsheet considerations for optimal use of high pressure grinding rolls

✍ Scribed by F.P. van der Meer; A. Gruendken

Book ID: 113801717
Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 580 KB
Volume: 23
Category: Article
ISSN: 0892-6875
DOI: 10.1016/j.mineng.2009.09.012

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A novel approach for the modelling of hi

A novel approach for the modelling of high-pressure grinding rolls

✍ M. Torres; A. Casali 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 604 KB

Some benefits of using studded surfaces

Some benefits of using studded surfaces in high pressure grinding rolls

✍ W.I.L. Lim; K.R. Weller 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 937 KB

Surface Wave Based Ultrasonic Technique

Surface Wave Based Ultrasonic Technique for Finding the Optimal Grinding Condition of High Speed Steel (HSS) Work Rolls

✍ Sarmishtha Palit Sagar; G. V. S. Murthy; Tarun Kumar Das; Amit Prakash; Uday Sha 📂 Article 📅 2012 🏛 John Wiley and Sons 🌐 English ⚖ 932 KB

Predicting the specific energy required

Predicting the specific energy required for size reduction of relatively coarse feeds in conventional crushers and high pressure grinding rolls

✍ S. Morrell 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 220 KB

Considerations in the use of high-pressu

Considerations in the use of high-pressure size exclusion chromatography (HPSEC) for determining molecular weights of aquatic humic substances

✍ Qunhui Zhou; Stephen E. Cabaniss; Patricia A. Maurice 📂 Article 📅 2000 🏛 IWA Publishing 🌐 English ⚖ 221 KB

Use of kinetic plots for the optimizatio

Use of kinetic plots for the optimization of the separation time in ultra-high-pressure LC

✍ Sebastiaan Eeltink; Wim M. C. Decrop; Frank Steiner; Mario Ursem; Deirdre Caboot 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 232 KB

## Abstract The kinetic‐plot approach, in which experimental __t__~0~ and __N__‐values are extrapolated to the performance at maximum system pressure by increasing the column length, was validated by coupling 250×3 mm columns packed with 3 μm particles. The extra‐column volume introduced by couplin