𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Flow boiling heat transfer of water and sugar solutions in an annulus

✍ Scribed by Hong Yu; Roya Sheikholeslami; William O. S. Doherty


Publisher
American Institute of Chemical Engineers
Year
2004
Tongue
English
Weight
179 KB
Volume
50
Category
Article
ISSN
0001-1541

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Heat transfer to water in an annulus
✍ Philip Miller; James J. Byrnes; David M. Benforado πŸ“‚ Article πŸ“… 1955 πŸ› American Institute of Chemical Engineers 🌐 English βš– 469 KB πŸ‘ 1 views

## Abstract A limited number of measurements were made of the heat transfer coefficient from an electrically heated rod to water flowing in an annulus. Tests were performed at Reynolds numbers ranging from 5,000 to 22,000 (based on equivalent diameter), water temperatures of 70Β° and 125Β°F., and rel

An analysis of slug flow heat transfer i
✍ William T. Snyder πŸ“‚ Article πŸ“… 1963 πŸ› American Institute of Chemical Engineers 🌐 English βš– 358 KB πŸ‘ 1 views

## Abstract A solution is presented for the temperature distribution in a fluid flowing in an eccentric annulus formed with circular cyclinders under the assumption of slug flow. The flow is assumed to be fully developed thermally with constant thermophysical properties. The outer surface is assume

Numerical Modelling of Flow Boiling Heat
✍ Wei Lu; Chang-Ying Zhao πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 371 KB πŸ‘ 2 views

## Abstract The flow boiling heat transfer performance in horizontal metal‐foam tubes is numerically investigated based on the flow pattern map retrieved from experimental investigations. The flow pattern and velocity profile are generally governed by vapour quality and mass flow rate of the fluid.

Boiling heat transfer characteristics in
✍ Shiina, Koji ;Sakaguchi, Seiichirou πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 382 KB πŸ‘ 1 views

Boiling heat transfer characteristics in liquid-liquid direct contact parallel flow of immiscible liquids were investigated. The effect of operating conditions and column specifications on the UA factor of heat transfer were determined and the following empirical correlation is proposed for conditio