✦ LIBER ✦

Flexible boot for constant velocity universal joint

Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 88 KB
Volume: 2007
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(07)70301-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Boot for constant velocity universal joi

Boot for constant velocity universal joint

📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 110 KB

This patent describes brush seals designs that are intended to extend the range of applications that could be sealed using such seals. Typical high temperature alloy bristles are said to be limited to 365 m/s and 800°C. Typically ceramic or polymeric fibres are very thin, 2-3 μm diameter. Brush seal

Boot for constant velocity universal joi

Boot for constant velocity universal joint

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 147 KB

This patent describes a gasket for an alkaline dry cell which is injection moulded in 6-12 nylon, and is designed to inhibit crack formation occurring when a collector is inserted through the central boss. The problem is overcome by using recycled polyhexamethylene dodecamide resin, which has previo

Silicone boot for constant velocity univ

Silicone boot for constant velocity universal joint

📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 248 KB

Baker Hughes Inc. USA This patent describes the construction of a downhole pump that includes an electric motor containing a dielectric lubricant. A seal section is mounted to the motor for reducing the pressure differential between the lubricant in the motor and the well bore fluid. A mechanical sh

Boot for constant velocity joint

📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 345 KB

Boot for constant velocity joint

📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 153 KB

Two examples of the lip seal with replaceable sealing element described in

Boot for constant velocity joint

📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 296 KB

This patent describes a mechanical seal which is designed to have an external quench supply within compact dimensions and also be readily assembled and disassembled. The quench is provided through port (40) and circulates around the outside diameter of the seal faces (3, 10) and into the narrow spac