𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fire performance of highly flowable reactive powder concrete

✍ Scribed by Chin-Tsung Liu; Jong-Shin Huang


Publisher
Elsevier Science
Year
2009
Tongue
English
Weight
718 KB
Volume
23
Category
Article
ISSN
0950-0618

No coin nor oath required. For personal study only.

✦ Synopsis


The fire performance of highly flowable reactive powder concrete (RPC) is of importance and necessary to be investigated prior to the application to building construction. By conducting a series of fire resistance tests, it is found that the residual compressive strength of RPC decreases with increasing fire duration. As compared to high performance concrete (HPC) and ordinary concrete (OC), the studied RPC not only has a higher fire endurance temperature but also possesses a larger residual compressive strength after fire. In addition, the experimental results of thermogravimetric analyses on RPC, HPC and OC specimens suffered from the same fire temperature and duration indicate that the total weight loss of RPC is lower than others. Besides excellent workability and high compressive strength, the studied RPC could provide better fire resistance than HPC and OC, and thus is applicable to building materials.


πŸ“œ SIMILAR VOLUMES


Fire suppressing performance of superfin
✍ Kaiqian Kuang; W. K. Chow; Xiaomin Ni; Donglei Yang; Wenru Zeng; Guangxuan Liao πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 618 KB

## Abstract Fire suppression effectiveness of a new kind of dry powder based on potassium bicarbonate was studied in this paper. The powder consisted of superfine potassium bicarbonate and some organic and inorganic additives, which was denoted as β€˜K‐powder’. The physical and chemical characteristi

Fabrication and handling aspects of high
✍ Peter Towndrow πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 122 KB

Lithium hydride is commonly encountered as a reducing agent in the synthesis of organic compounds, where it is typically handled in quantities of 5 g or so, but, at AWE, lithium hydride powders can be manufactured, handled, and fabricated into complex shapes on the kilogram scale. As the material is

Mechanical properties of reactive powder
✍ Halit YazΔ±cΔ±; Mert YΓΌcel YardΔ±mcΔ±; Serdar AydΔ±n; AnΔ±l Ş. Karabulut πŸ“‚ Article πŸ“… 2009 πŸ› Elsevier Science 🌐 English βš– 494 KB

Mechanical properties (compressive strength, flexural strength, and toughness) of reactive powder concrete (RPC) produced with class-C fly ash (FA) and ground granulated blast furnace slag (GGBFS) were investigated under different curing conditions (standard, autoclave and steam curing) in this stud

Investigation of hydration and pozzolani
✍ HΓ©lΓ¨ne Zanni; Marcel Cheyrezy; Vincent Maret; Samuel Philippot; Pedro Nieto πŸ“‚ Article πŸ“… 1996 πŸ› Elsevier Science 🌐 English βš– 621 KB

Hydration of RPC (Reactive Powder Concrete) and pozzolanic reaction were studied by zgSi NMR using SPE/MAS technique. Industrial cement and materials (silica fume, crushed quartz) constitutive of RPC imposed a careful study of spectra acquisition (relaxation times, spinning velocity). + . . Two RPC