✦ LIBER ✦

Finite element analysis of slope stability using a nonlinear failure criterion

✍ Scribed by X. Li

Book ID: 108101509
Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 280 KB
Volume: 34
Category: Article
ISSN: 0266-352X
DOI: 10.1016/j.compgeo.2006.11.005

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Stability analysis of slopes with genera

Stability analysis of slopes with general nonlinear failure criterion

✍ X. J. Zhang; W. F. Chen 📂 Article 📅 1987 🏛 John Wiley and Sons 🌐 English ⚖ 725 KB

Finite element reliability analysis of s

Finite element reliability analysis of slope stability

✍ Xiao-hui Tan; Jian-guo Wang 📂 Article 📅 2009 🏛 SP Zhejiang University Press 🌐 English ⚖ 379 KB

Reliability analysis of slope Stability

Reliability analysis of slope Stability using stochastic finite element method

✍ Khaled Farah; Mounir Ltifi; Hedi Hassis 📂 Article 📅 2011 🏛 Elsevier 🌐 English ⚖ 381 KB

This paper deals with the reliability analysis of slope stability with spatial variability of soil properties. Supposing an elastic soil behavior until yield criteria, a stresses mobilized along slip surface are evaluated to formulate the performance function. The results of SFEM (Stochastic Finite

Upper bound analysis of slope stability

Upper bound analysis of slope stability with nonlinear failure criterion based on strength reduction technique

✍ Zhao, Lian-heng ;Li, Liang ;Yang, Feng ;Luo, Qiang ;Liu, Xiang 📂 Article 📅 2010 🏛 Chinese Electronic Periodical Services 🌐 English ⚖ 590 KB

On the Assessment of Failure in Slope St

On the Assessment of Failure in Slope Stability Analysis by the Finite Element Method

✍ H. Zheng; D. F. Liu; C. G. Li 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 229 KB

Finite element analysis of progressive f

Finite element analysis of progressive failure in long slopes

✍ N.-E. Wiberg; M. Koponen; K. Runesson 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 575 KB

Progressive failure in long natural clay slopes with an underlying weak shear zone is studied. The clay slope is assumed to be elastic-perfectly plastic, whereas the shear zone may have an elastic-plastic strain softening behaviour. The failure will occur due to the development of large shear deform