✦ LIBER ✦

Finite-element analysis of SAW reflection from a metallic grating with an arbitrary angle of incidence

✍ Scribed by Kazuhiro Ohbuchi; Masanori Koshiba

Book ID: 112079623
Publisher: John Wiley and Sons
Year: 1993
Tongue: English
Weight: 499 KB
Volume: 76
Category: Article
ISSN: 1042-0967
DOI: 10.1002/ecjc.4430760902

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Finite-element analysis of plane wave di

Finite-element analysis of plane wave diffraction from metallic gratings with arbitrary complex permittivity

✍ Yasunori Nakata; Masanori Koshiba 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 818 KB

Hybrid finite-element–analytical method

Hybrid finite-element–analytical method for the analysis of diffraction from metallic gratings of arbitrary profile

✍ Golias, N. A.; Kriezis, Em. E.; Tsiboukis, T. D. 📂 Article 📅 1995 🏛 Optical Society of America 🌐 English ⚖ 363 KB

Boundary-element analysis of plane-wave

Boundary-element analysis of plane-wave diffraction from metallic gratings with arbitrary complex permittivity

✍ Yasunori Nakata; Masanori Koshiba 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 603 KB

Reflection polarizing beam splitter of a

Reflection polarizing beam splitter of a fused-silica metal-based sandwiched grating at an incident angle of 45°

✍ Bo Wang; Li Chen; Liang Lei; Jinyun Zhou 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 1011 KB

Analysis of shielded microstrip lines wi

Analysis of shielded microstrip lines with arbitrary metallization cross section using a vector finite element method

✍ Alam, M.S.; Hirayama, K.; Hayashi, Y.; Koshiba, M. 📂 Article 📅 1994 🏛 IEEE 🌐 English ⚖ 564 KB

A finite element analysis of metal-formi

A finite element analysis of metal-forming problems with an elastic-viscoplastic material model

✍ Abhijit Chandra; Subrata Mukherjee 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 882 KB

The formulation is capable of using any of a class of combined creep-plasticity constitutive models with state variables for the description of material behaviour. The specific problem considered is plane strain extrusion using the constitutive model originally proposed by Hart. Numerical results ar