An approach based on the finite element method (FEM) with the rectangular-parallelepipd edge element is proposed for the analysis of electromagnetic waveguide bends. Here, to be permissible for analysis of various electromagnetic waveguides, the analytical relations in the uniform waveguide are cons
FINITE ELEMENT ANALYSIS OF A THREE-DIMENSIONAL UNDERWATER CABLE WITH TIME-DEPENDENT LENGTH
✍ Scribed by P.-H. Wang; R.-F. Fung; M.-J. Lee
- Publisher
- Elsevier Science
- Year
- 1998
- Tongue
- English
- Weight
- 400 KB
- Volume
- 209
- Category
- Article
- ISSN
- 0022-460X
No coin nor oath required. For personal study only.
✦ Synopsis
Three-dimensional underwater vibrations of a geometrically non-linear cable with a weight at the lower end are investigated. The length of the cable is time-dependent. A set of non-linear, time-varying differential equations describing this system is derived by Hamilton's principle and the variable-domain finite element method. The results of numerical simulation are presented for constant-speed and sinusoidal axial motions of the cable. The vibration responses of three initial conditions are shown. The effects of initial displacements, initial tensions due to gravity and the hydrodynamic forces on the non-linear longitudinal and transverse amplitudes are presented. Finally, some conclusions are drawn.
📜 SIMILAR VOLUMES
## Abstract A fast, higher order three‐dimensional finite‐element method is presented for the efficient and accurate analysis of microwave waveguide devices. Two solution algorithms are designed. The first one uses mixed‐order triangular prism elements in conjunction with a special frontal solver.
The authors of reference [1] solved the Laplace transformed equation ( 20) below by three consecutive similarity transformations to make the symmetric square matrices M, C and K diagonal for the inverse Laplace transform. The "rst transformation is
## Abstract A new finite element (FE) scheme is proposed for the solution of time‐dependent semi‐infinite wave‐guide problems, in dispersive or non‐dispersive media. The semi‐infinite domain is truncated via an artificial boundary ℬ︁, and a high‐order non‐reflecting boundary condition (NRBC), based