✦ LIBER ✦

Finishing and trimming treatment of small parts

✍ Scribed by R. M. Khalimulin

Publisher: Springer
Year: 1992
Tongue: English
Weight: 119 KB
Volume: 28
Category: Article
ISSN: 0009-2355
DOI: 10.1007/bf01148890

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Finishing of small holes in fermentation

Finishing of small holes in fermentation equipment parts

✍ V. V. Lugovskii 📂 Article 📅 1988 🏛 Springer 🌐 English ⚖ 294 KB

4449390 Automatic unit for hot molding a

4449390 Automatic unit for hot molding and trimming of metal parts

📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 135 KB

Comparison of roller burnishing and othe

Comparison of roller burnishing and other methods of finishing treatment of the surface of openings in parts from tool steel D3 for cold forming

✍ A. Akkurt 📂 Article 📅 2011 🏛 Springer US 🌐 English ⚖ 564 KB

IDIM and the mass production of small-lo

IDIM and the mass production of small-lot-size parts

✍ J. W. M. Krikhaar 📂 Article 📅 1993 🏛 Springer 🌐 English ⚖ 390 KB

Single-step dyeing and finishing treatme

Single-step dyeing and finishing treatment of cotton with 1,2,3,4-butanetetracarboxylic acid

✍ Hyuang-Min Choi; Magesh Srinivasan; Nancy M. Morris 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 834 KB

A single-step dyeing and finishing (SDF) process was developed to eliminate dyeing problems associated with cotton crosslinked by polycarboxylic acid such as 1,2,3,4-butanetetracarboxylic acid (BTCA). This process consisted of several steps: (a) impregnation of the fabric by the bath containing BTCA

Finish production of parts with thread a

Finish production of parts with thread and flats by cross-wedge rolling

✍ Yu. N. Mashnev 📂 Article 📅 1986 🏛 Springer 🌐 English ⚖ 259 KB