Fine poly(ether ether ketone) powders

✍ Scribed by J. V. Facinelli; A. E. Brink; S. Liu; H. Li; S. L. Gardner; R. M. Davis; J. S. Riffle; M. Marrocco; S. Harding

• Publisher: John Wiley and Sons
• Year: 1997
• Tongue: English
• Weight: 233 KB
• Volume: 63
• Category: Article
• ISSN: 0021-8995
• DOI: 10.1002/(sici)1097-4628(19970321)63:12<1571::aid-app8>3.0.co;2-l

✦ Synopsis

The physical form of polymers is often important for carrying out subsequent processing operations. For example, fine powders are desirable for molding and sintering compounds because they consolidate to produce void free components. The objective of this work is to prepare fine polymeric particulates suitable for processing into fiber reinforced polymer matrix composites. Micron size particles of poly(ether ether ketone) (PEEK) were prepared by rapidly quenching solutions of these materials. PEEK pellets were dissolved at temperatures near the PEEK melting point in a mixture of terphenyls and quaterphenyls; then the solution was quenched to a temperature between the T g and T m (É 225ЊC) by adding a room temperature eutectic mixture of diphenyl ether and biphenyl. A supersaturated, metastable solution of PEEK resulted, causing rapid nucleation. Fine PEEK particles rapidly crystallized from this solution. The average particle size was measured using transmission electron microscopy, atomic force microscopy, and by light scattering of aqueous suspensions which had been fractionated by centrifugation. The average particle diameter was about 0.6 mm. Three dimensional photomicrographs obtained via atomic force microscopy showed some aggregates in the suspensions.