✦ LIBER ✦

Figure of merit determination of thermo-electric modules

✍ Scribed by A.E.D. Heylen

Publisher: Elsevier Science
Year: 1975
Weight: 502 KB
Volume: 15
Category: Article
ISSN: 0013-7480
DOI: 10.1016/0013-7480(75)90012-1

No coin nor oath required. For personal study only.

✦ Synopsis

Two methods have been devised which allow the figure of merit of a thermo-electric module and the three individual parameters which constitute it, to be determined. The first method, which is more extensive, allows the temperature variation of the parameters to be determined whilst the second method is a short cut. Agreement between the two methods is within 6 per cent error. Figure of merit Peltier and Seebeck coefficient Electrical resistance Thermal conductance Refrigeration performance Kelvin relation Hot and cold junction Thermocouple Thermo-electric module

📜 SIMILAR VOLUMES

The Figure of Merit in Amorphous Thermoe

The Figure of Merit in Amorphous Thermoelectrics

✍ Nolas, G.S. ;Goldsmid, H.J. 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 77 KB

Boundary Scattering and the Thermoelectr

Boundary Scattering and the Thermoelectric Figure of Merit

✍ Sharp, J.W. ;Poon, S.J. ;Goldsmid, H.J. 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 124 KB

The lattice thermal conductivity of a thermoelectric material can be significantly reduced at ordinary temperatures by boundary scattering but the beneficial effect on the figure of merit can sometimes be more than offset by boundary scattering of the charge carriers. Here we extend the previous the

The thermoelectric figure of merit of po

The thermoelectric figure of merit of poor thermal conductors

✍ A.J. Dixon 📂 Article 📅 1977 🏛 Elsevier Science ⚖ 183 KB

Calculations are given to show that for low thermal conductivity materials the radiation losses at even moderate temperatures preclude the use of the Harman technique for measuring the thermoelectric figure of merit. Measurements on liquid T16~,S%,,. which has suitable thermoelectric properties, con

A hydraulic figure-of-merit for heart va

A hydraulic figure-of-merit for heart valve prostheses

✍ Viggers, Robert F. ;Robel, Stephen B. ;Sauvage, Lester R. 📂 Article 📅 1967 🏛 John Wiley and Sons 🌐 English ⚖ 470 KB

The pressure losses in the currently available prostheses are too high. We believe ail excellent way to focus designers' att,ention upon this fact is to rank the various designs according to their hydraulic efficiency. The proposal of this paper is for pressure drop vs. velocity data (pulsatile flow

Figure of Merit and Cycling Sidebands in

Figure of Merit and Cycling Sidebands in Adiabatic Decoupling

✍ Ēriks Kupce; Ray Freeman; Gerhard Wider; Kurt Wüthrich 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 168 KB

Analytical figures of merit for tensoria

Analytical figures of merit for tensorial calibration

✍ Klaas Faber; Avraham Lorber; Bruce R. Kowalski 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 500 KB

The subject of analytical figures of merit for tensorial calibration is critically reviewed. Tensorial calibration derives its name from tensor algebra, which provides a classification of calibration methods depending on the complexity of the data obtained for one chemical sample. Expressions for ne