✦ LIBER ✦

Fiber breakage and dispersion in carbon-fiber-reinforced nylon 6/clay nanocomposites

✍ Scribed by Hu Zhou; Zhongzhong Qian; Xiangfu Meng; Yanfen Ding; Shimin Zhang; Mingshu Yang

Publisher: John Wiley and Sons
Year: 2007
Tongue: English
Weight: 315 KB
Volume: 106
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.26818

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Wear properties and mechanisms of nylon

Wear properties and mechanisms of nylon and carbon-fiber-reinforced nylon in dry and wet conditions

✍ Junxiang Wang; Mingyuan Gu 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 364 KB 👁 1 views

## Abstract A microinjection machine was used to prepare specimens of nylon 1010 and carbon fiber (CF)‐reinforced nylon 1010 composites. The friction and wear properties were investigated with a ring–block wear tester in wet and dry conditions. The wear rate of nylon 1010 increased, but the frictio

Interlaminar Fracture Toughness of Carbo

Interlaminar Fracture Toughness of Carbon Fiber/Epoxy Composites using Short Kevlar Fiber and/or Nylon-6 Powder Reinforcement

✍ B. Y. Park; S. C. Kim; B. Jung 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 455 KB 👁 2 views

## Mode I (G IC ) and Mode II (G IIC ) interlaminar fracture toughness of carbon-fiber/epoxy composites have been investigated as a function of the amount of short Kevlar-29 fiber (SKF) and/or Nylon-6 powder (N6P) between continuous fiber layers. G IIC increased with increasing crack length as a con