✦ LIBER ✦

FFT and wavelet-based analysis of the influence of machine vibrations on hard turned surface topographies

✍ Scribed by Li, Haosheng; Wu, Su; Hubert, Kratz

Book ID: 108485035
Publisher: Bioline International
Year: 2007
Tongue: English
Weight: 428 KB
Volume: 12
Category: Article
ISSN: 1007-0214
DOI: 10.1016/s1007-0214(07)70065-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Characterization of the topography of tu

Characterization of the topography of turned surfaces and its influence on the fatigue life of Al-7075

✍ Christoph Wiesner; Hans-Ulrich Künzi; Bernard Ilschner 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 636 KB

Statistical analysis of the effects of m

Statistical analysis of the effects of machining parameters and workpiece hardness on the surface finish of machined medium carbon steel

✍ Adel Mahammod Hassan; Mohammed T. Havajneh 📂 Article 📅 2001 🏛 Springer US 🌐 English ⚖ 138 KB

Analysis of deformation of rotor and inf

Analysis of deformation of rotor and influence on the performance of gyro based on B-spline wavelet FEM

✍ Liu Jian-feng; Yuan Gan-nan; Zhou Wei-dong 📂 Article 📅 2005 🏛 Harbin Engineering University 🌐 English ⚖ 693 KB

Multi-cracks detection of a beam-like st

Multi-cracks detection of a beam-like structure based on the on-vehicle vibration signal and wavelet analysis

✍ Khoa Viet Nguyen; Hai Thanh Tran 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 361 KB

In this paper, a new method for detecting a multi-cracked beam-like structure subjected to a moving vehicle is presented. The crack model is adopted from fracture mechanics. The dynamic response of the bridge–vehicle system is measured directly from the moving vehicle. When moving along the structur

Recognition of the Communication Signals

Recognition of the Communication Signals Using Particle Swarm Optimization and Support Vector Machine Based on the Multi-Resolution Wavelet Analysis

✍ Ataollah Ebrahimzadeh Shrime; Mahdi Yousefi 📂 Article 📅 2010 🏛 Springer US 🌐 English ⚖ 375 KB

Investigating the machinability evaluati

Investigating the machinability evaluation of Hadfield steel in the hard turning with Al2O3/TiC mixed ceramic tool based on the response surface methodology

✍ Jenn-Tsong Horng; Nun-Ming Liu; Ko-Ta Chiang 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 985 KB

In this study a series of tests were conducted in order to investigate the machinability evaluation of Hadfield steel in the hard turning. The austenitic Hadfield steels, containing about 1.0-1.2% C and 11-14% Mn in mass, have excellent wear-resistance property and are extensively used in various en