𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fatigue strength depending on position of cracks for weldments

✍ Scribed by Hae Woo Lee; Won Jo Park

Publisher
Springer-Verlag
Year
2006
Tongue
English
Weight
417 KB
Volume
20
Category
Article
ISSN
1738-494X

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Dependence of stress frequency on fatigu
Dependence of stress frequency on fatigue crack initiation in orthotropic material
✍ H. Sakamoto; S. Takezono πŸ“‚ Article πŸ“… 1990 πŸ› Elsevier Science 🌐 English βš– 857 KB

Tbe effect of stress frequency on fatigue crack initiation in 99.5% pure titanium plate, which has remarkable strain rate dependence in the plastic region and notable orthotropy, was studied. Fatigue crack initiation tests were carried out under three kinds of stress frequencies (0.2, 1 and 20 Hz).

An improved model for predicting the cra
An improved model for predicting the crack size and plasticity dependence of fatigue crack propagation
✍ Li Chun Bian; Zouheir Fawaz; Kamran Behdinan πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 423 KB

The angled crack problem has been given special attention in the recent years by fracture mechanics investigators due to its close proximity to realistic conditions in engineering structures. In this paper, an investigation of fatigue crack propagation in rectangular steel plates containing an incli

Influence of stress ratio on the thresho
Influence of stress ratio on the threshold level for fatigue crack propagation in high strength steels
✍ Ohta Akihiko; Sasaki Etsuo πŸ“‚ Article πŸ“… 1977 πŸ› Elsevier Science 🌐 English βš– 722 KB

Centrally cracked specimens of JIS SM58Q and I-IT80 steels were fatigued. The fatigue crack growth rates, da/dn, and the stress intensity threshold levels, AK,, were measured over the range of stress ratio, R, from -1 to 0.8 by the use of an automatic method of continuously decreasing stress intensi

Fatigue strength properties of precipita
Fatigue strength properties of precipitation strengthening stainless steel A286 focused attention on small fatigue crack behaviour
✍ H. Wu; Y. Oshida; S. Hamada; H. Noguchi πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier 🌐 English βš– 553 KB

In order to safely use precipitation strengthening type A286 stainless steel in high cycles, the fundamental fatigue strength characteristics were investigated using fatigue tests at room temperature. During the fatigue test, the author paid attention to the behaviour of small fatigue cracks in orde