𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fatigue of highly strengthened Cu–Ag alloys

✍ Scribed by J. Freudenberger; H.-J. Klauß; K. Heinze; A. Gaganov; M. Schaper; L. Schultz

Book ID
103831296
Publisher
Elsevier Science
Year
2008
Tongue
English
Weight
200 KB
Volume
30
Category
Article
ISSN
0142-1123

No coin nor oath required. For personal study only.

✦ Synopsis

The fatigue behaviour of high strength Cu-Ag alloys for applications as conductor materials in pulsed high-field magnets is reported. The desired high strength level is achieved through a combination of thermal treatments and heavy cold forming. The fatigue performance of all the three investigated alloys proved to fit the prospected service requirements in that a fatigue lifetime in the range of 5-9 AE 10 3 cycles to failure is observed, when a stress amplitude of r a = 500 MPa at a load ratio R = 0.1 is applied.

📜 SIMILAR VOLUMES

Mechanical properties of precipitation s
Mechanical properties of precipitation strengthening Cu-base alloys highly deformed by ARB process
✍ R. Monzen; Y. Takagawa; C Watanabe; D. Terada; N. Tsuji 📂 Article 📅 2011 🏛 Elsevier 🌐 English ⚖ 578 KB

The enhancement of strength of Cu-1.2wt%Ni-0.2wt%Be-0.1wt%Zr and Cu-1.4wt%Ni-0.25wt%P-0.1wt%Zr alloys has been tried by the combination of ARB process by 5 cycles and aging treatment at 350 to 450°C. The grain sizes of the alloys, severely deformed by 5-cycle ARB process, were refined down to about