## Alldraet -Thef&urepraxgses of micro or small cracks may behave differently as suggested by ~ntinu~ medium mechanics. A minimum fracture unit should exist for a real ~1~ material, for any part sruaher than this unit fracture mechanics caunot be applied. Based on this idea, the elastic stress and
Fatigue limits of crack initiation and propagation at notched plates
β Scribed by Kang Yong Lee; Taek Sung Lee
- Publisher
- Elsevier Science
- Year
- 1986
- Tongue
- English
- Weight
- 338 KB
- Volume
- 25
- Category
- Article
- ISSN
- 0013-7944
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Theoretical estimation of fatigue limit of notches under axial push-pull loading was made with an emphasis on the formation of non-propagating crack. A critical notch radius and a critical stress concentration factor were determined so as to distinguish notch fatigue limits with crack initiation and
Under the conditions of constant nominal applied stress. increasing notch root radius causes an increase in the number of cycles to initiate a fatigue crack at a notch root. An explanation of the effect is given in terms of the effective stress concentration factor of the notch. Data are presented w
The micromechanisms of fatigue fracture in bone cements were explored and characterized in this investigation. Fatigue crack initiation sites were identified and the microscopic features responsible for crack initiation are illustrated. Differences in the fracture morphology of PMMA beads, in early
In the following, some of the concepts discussed before afie assessed with respect to their ability to predict fatigue lives under variable amplitude loading. Typical trends of results are outlined.